H3C S5810 Series, Руководство по эксплуатации

Страница: 178 / 820

1-9
To do… Use the command… Remarks
Enter port
group view port-group manual
port-group-name
z
In port group view, the
subsequent configurations
apply to all ports in the port
group.
z
In Layer-2 aggregate interface
view, the subsequent
configurations apply to the
Layer-2 aggregate interface
and all its member ports.
Configure the link type of the
port(s) as hybrid
port link-type hybrid Required
Assign the hybrid port(s) to
the specified VLAN(s) port hybrid vlan vlan-id-list
{ tagged | untagged }
Required
By default, a hybrid port allows
only packets of VLAN 1 to pass
through untagged.
Configure the default VLAN of
the hybrid port
port hybrid pvid vlan vlan-id
Optional
VLAN 1 is the default by default.
z
To change the link type of a port from trunk to hybrid or vice versa, you must set the link type to
access first.
z
Before assigning a hybrid port to a VLAN, create the VLAN first.
z
After configuring the default VLAN for a hybrid port, you must use the port hybrid vlan command
to configure the hybrid port to allow packets from the default VLAN to pass through, so that the
egress port can forward packets from the default VLAN.
Displaying and Maintaining VLAN
To do... Use the command… Remarks
Display VLAN information
display vlan [ vlan-id1 [ to vlan-id2 ] | all |
dynamic | reserved | static ]
Available in any view
Display VLAN interface
information display interface vlan-interface
[
vlan-interface-id
]
Available in any view
Display hybrid ports or trunk
ports on the device
display port { hybrid | trunk } Available in any view
Clear statistics on a port
reset counters interface
[
interface-type
[
interface-number
] ]
Available in user view
The reset counters interface command can be used to clear statistics on a VLAN interface. For more
information, refer to Ethernet Interface Commands in the Access Volume .