H3C S5810 Series, Руководство по эксплуатации

Страница: 125 / 820

1-24
Configuration procedure
Follow these steps to configure the timeout factor:
To do... Use the command... Remarks
Enter system view
system-view
—
Configure the timeout factor of the device
stp timer-factor number
Optional
3 by default
z
Timeout time = timeout factor × 3 × hello time.
z
Typically, we recommend that you set the timeout factor to 5, or 6, or 7 for a stable network.
Configuration example
# Set the timeout factor to 6.
<Sysname> system-view
[Sysname] stp timer-factor 6
Configuring the Maximum Port Rate
The maximum rate of a port refers to the maximum number of MSTP packets that the port can send
within each hello time. The maximum rate of a port is related to the physical status of the port and the
network structure.
Configuration procedure
Follow these steps to configure the maximum rate of a port or a group of ports:
To do... Use the command... Remarks
Enter system view
system-view
—
Enter Ethernet
interface view,
or Layer-2
aggregate
interface view
interface interface-type
interface-number
Enter
interface view
or port group
view
Enter port
group view
port-group manual
port-group-name
Required
Use either command.
Configurations made in interface
view will take effect on the
current port only; configurations
made in port group view will take
effect on all ports in the port
group.
Configure the maximum rate of
the port(s)
stp transmit-limit
packet-number
Optional
10 by default