H3C S5810 Series, Руководство по эксплуатации

Страница: 93 / 820

1-9
To do… Use the command… Remarks
Enable LLDP polling and set
the polling interval
lldp check-change-interval interval
Required
Disabled by default
Configuring the TLVs to Be Advertised
Follow these steps to configure advertisable TLVs:
To do… Use the command… Remarks
Enter system view system-view
—
Enter
Ethernet
interface view
interface interface-type
interface-number
Enter Ethernet
interface view
or port group
view
Enter port
group view
port-group manual port-group-name
Required
Use either command.
Configure the advertisable
TLVs
lldp tlv-enable { basic-tlv { all |
port-description | system-capability |
system-description | system-name } |
dot1-tlv { all | port-vlan-id |
protocol-vlan-id [ vlan-id ] | vlan-name
[ vlan-id ] } | dot3-tlv { all |
link-aggregation | mac-physic |
max-frame-size | power } | med-tlv { all |
capability | inventory | location-id
{ civic-address device-type country-code
{ ca-type ca-value } &<1–10> |
elin-address tel-number } |
network-policy | power-over-ethernet } }
Optional
By default, all types of
LLDP TLVs except
location identification
TLV are advertisable.
Configuring the Management Address and Its Encoding Format
LLDP encodes management addresses in numeric or character string format in management address
TLVs.
By default, management addresses are encoded in numeric format. If a neighbor encoded its
management address in character string format, you can configure the encoding format of the
management address as string on the connecting port to guarantee normal communication with the
neighbor.
Follow these steps to configure a management address to be advertised and its encoding format on one
or a group of ports:
To do… Use the command… Remarks
Enter system view system-view —
Enter Ethernet
interface view interface interface-type
interface-number Enter
Ethernet
interface
view or port
group view
Enter port
group view
port-group manual port-group-name
Required
Use either command.