H3C S5810 Series, Руководство по эксплуатации

Страница: 260 / 820

1-5
Reply from 10.1.1.2: bytes=56 Sequence=3 ttl=128 time=3 ms
Reply from 10.1.1.2: bytes=56 Sequence=4 ttl=128 time=2 ms
Reply from 10.1.1.2: bytes=56 Sequence=5 ttl=128 time=3 ms
--- host.com ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 1/2/4 ms
Dynamic Domain Name Resolution Configuration Example
Network requirements
As shown in Figure 1-3 , the IP address of the DNS server is 2.1.1.2/16 and the name suffix is com. The
mapping between domain name host and IP address 3.1.1.1/16 is stored in the com domain.
Dynamic domain name resolution and the domain name suffix are configured on the device that serves
as a DNS client, and thus the device can use domain name host to access the host with the domain
name host.com and the IP address 3.1.1.1/16.
Figure 1-3 Network diagram for dynamic domain name resolution
Configuration procedure
z
Before performing the following configuration, make sure that the device and the host are
accessible to each another via available routes, and the IP addresses of the interfaces are
configured as shown Figure 1-3 .
z
This configuration may vary with different DNS servers. The following configuration is performed on
a Windows server 2000 PC.
1) Configure the DNS server
# Enter the DNS server configuration page.
Select Start > Programs > Administrative Tools > DNS .
# Create zone com.