H3C S5810 Series, Руководство по эксплуатации

Страница: 397 / 820

6-5
Configure WRR Queuing
Configuration procedure
1) Configuring basic WRR queuing
Follow these steps to configure basic WRR queuing:
To do… Use the command… Remarks
Enter system view system-view —
Enter
interface
view
interface interface-type
interface-number
Enter
interface
view or port
group view
Enter port
group view
port-group manual
port-group-name
Use either command
Settings in interface view take effect
on the current interface; settings in
port group view take effect on all ports
in the port group.
Configure a basic WRR
queue
qos wrr queue-id group
group-id weight
schedule-value
Required
The default queuing algorithm on an
interface is WRR queuing.
Display WRR queuing
configuration information
on interface(s) display qos wrr interface
[ interface-type
interface-number ]
Optional
Available in any view
When you use the WRR queue scheduling algorithm, make sure that queues in the same scheduling
group are consecutive.
Configuration example
1) Network requirements
z
Enable WRR queuing on the interface.
z
Assign queue 0, queue 1, queue 2, and queue 3 to WRR group 1, with the weight of 10, 20, 50, and
70 respectively.
z
Assign queue 4, queue 5, queue 6, and queue 7 to WRR group 2, with the weight of 20, 50, 70, and
100 respectively.
2) Configuration procedure
# Enter system view.
<Sysname> system-view
# Configure WRR queuing on GigabitEthernet 1/0/1.
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] qos wrr 0 group 1 weight 10
[Sysname-GigabitEthernet1/0/1] qos wrr 1 group 1 weight 20
[Sysname-GigabitEthernet1/0/1] qos wrr 2 group 1 weight 50