H3C S5810 Series, Руководство по эксплуатации

Страница: 69 / 820

1-1
1
DLDP Configuration
When performing DLDP configuration, go to these sections for information you are interested in:
z
Overview
z
DLDP Configuration Task List
z
Enabling DLDP
z
Setting DLDP Mode
z
Setting the Interval for Sending Advertisement Packets
z
Setting the DelayDown Timer
z
Setting the Port Shutdown Mode
z
Configuring DLDP Authentication
z
Resetting DLDP State
z
Displaying and Maintaining DLDP
z
DLDP Configuration Example
z
Troubleshooting
Overview
Sometimes, unidirectional links may appear in networks . On a unidirectional link, one end can receive
packets from the other end but the other end cannot. Unidirectional links result in problems such as
loops in an STP-enabled network.
As for fiber links, two kinds of unidirectional links exist. One occurs when fibers are cross-connected, as
shown in Figure 1-1 . The other occurs when one end of a fiber is not connected or one fiber of a fiber
pair gets disconnected, as illustrated by the hollow arrows in Figure 1-2 .
Figure 1-1 Unidirectional fiber link: cross-connected fibers
Device A
GE1/0/49
GE1/0/50
Device B
GE1/0/49 GE1/0/50
PC