H3C S5810 Series, Руководство по эксплуатации

Страница: 404 / 820

8-2
To do… Use the command… Remarks
Enter system view system-view —
Enable the burst function
burst-mode enable
Required
Disabled by default
Configuring the Shared Buffer Manually
The shared buffer is assigned to incoming traffic and outgoing traffic respectively. The area buffers
incoming traffic is called the shared receive buffer and the area buffers outgoing traffic is called the
shared transmit buffer. Tune their size depending on the actual situation.
Follow these steps to configure the shared buffer manually:
To do… Use the command… Remarks
Enter system view system-view —
Set (in blocks) the shared
transmit buffer or shared
receive buffer
buffer-manage { ingress |
egress } share-size size-value
Optional
By default, there is no shared
receive buffer and the size of
the shared transmit buffer is
1776.
The manual shared buffer settings override the buffer settings automatically configured with the burst
function (if enabled). If you perform the undo buffer-manage share-size command while the burst
function is enabled, the buffer settings configured with the burst function rather than the default port
buffer settings take effect.
Displaying and Maintaining Port Buffer
To do… Use the command… Remarks
Display the shared buffer
configuration display buffer-manage
configuration
Available in any view