H3C S5810 Series, Руководство по эксплуатации

Страница: 801 / 820

1-19
To do… Use the command… Remarks
Clear NDP statistics
reset ndp statistics
[ interface interface-list ]
Available in user view
You can view the cluster status through not only the command lines, but also the seven-segment
display on the front panel of the device to judge the role of the device in the cluster, as described in the
following table:
Table 1-1 Seven-segment display description
Status
Mark
System LED
(SYS) status
Seven-segment display status
Description
The LED displays C .
The current device is the
administrator in the cluster.
The LED displays S .
The current device is a member
of the cluster.
Unit Steady green
The LED displays c .
The current device is a candidate
of the cluster.
Cluster Management Configuration Example
Network requirements
z
Three switches form cluster abc , whose management VLAN is VLAN 10. In the cluster, Switch B
serves as the management device (Administrator), whose network management interface is
VLAN-interface 2; Switch A and Switch C are the member devices (Member).
z
All the devices in the cluster use the same FTP server and TFTP server on host 63.172.55.1/24,
and use the same SNMP NMS and log services on host IP address: 69.172.55.4/24.
z
Add the device whose MAC address is 000f-e201-0013 to the blacklist.