1-30
Configuring the Maximum Transmission Rate of Ports
Refer to
Configuring the Maximum Port Rate
in the section about root bridge configuration.
Configuring Ports as Edge Ports
Refer to
Configuring Ports as Edge Ports
in the section about root bridge configuration.
Configuring Path Costs of Ports
Path cost is a parameter related to the rate of a port. On an MSTP-enabled device, a port can have
different path costs in different MSTIs. Setting appropriate path costs allows VLAN traffic flows to be
forwarded along different physical links, thus to achieve VLAN-based load balancing.
The device can automatically calculate the default path cost; alternatively, you can also configure the
path cost for ports.
Specifying a standard that the device uses when calculating the default path cost
You can specify a standard for the device to use in automatic calculation for the default path cost. The
device supports the following standards:
z
dot1d-1998
: The device calculates the default path cost for ports based on IEEE 802.1d-1998.
z
dot1t
: The device calculates the default path cost for ports based on IEEE 802.1t.
z
legacy
: The device calculates the default path cost for ports based on a private standard.
Follow these steps to specify a standard for the device to use when calculating the default path cost:
To do...
Use the command...
Remarks
Enter system view
system-view
—
Specify a standard for the
device to use when calculating
the default path costs for ports
of the device
stp pathcost-standard
{
dot1d-1998 | dot1t
|
legacy
}
Optional
The default standard used by
the device is
legacy
..
Table 1-7
Link speed vs. path cost
Link speed
Duplex state
802.1d-1998
802.1t
Private standard
0 —
65535
200,000,000
200,000
10 Mbps
Single Port
Aggregate Link 2 Ports
Aggregate Link 3 Ports
Aggregate Link 4 Ports
100
100
100
100
2,000,000
1,000,000
666,666
500,000
2,000
1,800
1,600
1,400
100 Mbps
Single Port
Aggregate Link 2 Ports
Aggregate Link 3 Ports
Aggregate Link 4 Ports
19
19
19
19
200,000
100,000
66,666
50,000
200
180
160
140
Содержание S5810 Series
Страница 307: ...ii Configured Multicast Group Policy Fails to Take Effect 1 32...
Страница 648: ...1 8 Return to the upper directory Sysname cd Display the current working directory Sysname pwd flash...
Страница 812: ...1 7 Role Slave Sysname stack_3 DeviceD Device type S5810 50S MAC address 000f e200 1003...