H3C S5810 Series, Руководство по эксплуатации

Страница: 91 / 820

1-7
Task Remarks
Enabling LLDP Required
Setting LLDP Operating Mode Optional
Setting the LLDP Re-Initialization Delay Optional
Enable LLDP Polling Optional
Configuring the TLVs to Be Advertised Optional
Configuring the Management Address and Its
Encoding Format
Optional
Setting the TTL Multiplier Optional
Configuring the Parameters Concerning LLDPDU
Sending
Optional
Performing Basic
LLDP
Configuration
Configuring the Encapsulation Format for LLDPDUs Optional
Configuring LLDP Trapping Optional
LLDP-related configurations made in Ethernet interface view takes effect only on the current port, and
those made in port group view takes effect on all ports in the current port group.
Performing Basic LLDP Configuration
Enabling LLDP
To make LLDP take effect on certain ports, you need to enable LLDP both globally and on these ports.
Follow these steps to enable LLDP:
To do… Use the command… Remarks
Enter system view system-view —
Enable LLDP globally lldp enable
Required
LLDP is disabled globally.
Enter Ethernet
interface view interface interface-type
interface-number
Enter Ethernet
interface view or
port group view
Enter port group
view port-group manual
port-group-name
Required
Use either command.
Enable LLDP lldp enable
Optional
By default, LLDP is enabled
on a port.