H3C S5810 Series, Руководство по эксплуатации

Страница: 633 / 820

1-6
z
You must save the file for the next device boot under the root directory of the device. You can copy
or move a file to change the path of it to the root directory.
z
You can’t to specify the boot file for the next boot of the USB device.
Configuring Temperature Alarm Thresholds for a Device
You can set temperature alarm thresholds for a device by using the following command. When the
temperature of a device exceeds the threshold, the device will generate alarm signals.
Follow these steps to configure temperature alarm thresholds for a device:
To do… Use the command… Remarks
Enter system view system-view —
Configure temperature alarm
thresholds for a device
temperature-limit slot
slot-num hotspot
sensor-number lowerlimit
warninglimit [ alarmlimit ]
Optional
By default:
z
Lower limit: 5
z
Warning limit: 70
z
Alarm limit: 80
Clearing the 16-bit Interface Indexes Not Used in the Current System
In practical networks, the network management software requires the device to provide a uniform,
stable 16-bit interface index. That is, a one-to-one relationship should be kept between the interface
name and the interface index in the same device.
For the purpose of the stability of an interface index, the system will save the 16-bit interface index when
a card or logical interface is removed.
If you repeatedly insert and remove different subcards to create or delete a large number of logical
interfaces, the interface indexes will be used up, which will result in interface creation failures. To avoid
such a case, you can clear all 16-bit interface indexes saved but not used in the current system in user
view.
After the above operation,
z
For a re-created interface, the new interface index may not be consistent with the original one.
z
For existing interfaces, their interface indexes remain unchanged.
Follow these steps to clear the 16-bit interface indexes not used in the current system:
To do… Use the command… Remarks
Clear the 16-bit interface
indexes saved but not used in
the current system
reset unused porttag
Required
Available in user view.