H3C S5810 Series, Руководство по эксплуатации

Страница: 807 / 820

1-2
For the S5810 series switches, only the 10 GE ports can be configured as the stack ports and the
switches can be connected to establish stacks only through some dedicated stack cables, which
include:
z
LSWM1STK
z
LSWM2STK
z
LSWM3STK
If you plug some other SFP+ modules to the 10 GE port after you configure the port as a stack port, the
state of the port will become down automatically.
Establishing a Stack
An administrator can establish a stack as follows:
z
Configure a private IP address pool for a stack and create the stack on the network device which is
desired to be the master device.
z
Configure ports between the stack devices as stack ports.
z
The master device automatically adds the slave devices into the stack, and assigns a number for
each stack member.
z
The administrator can log in to any slave device from the master device of the stack, and perform
configurations for the slave device.
Stack Configuration Task List
You cannot configure both stack management and cluster management functions for the device. For
details of the cluster management function, refer to Cluster Management Configuration in the System
Volume .
Complete the following tasks to configure stack:
Task Remarks
Configuring a Private IP Address Pool for a
Stack
Required
Configuring Stack Ports Required
Configuring the Master Device
of a Stack
Creating a Stack Required
Configuring Stack Ports of a Slave Device Required
Logging In to the CLI of a Slave from the Master Optional