
56
ADP200 • Quick installation guide - Specifications and connection
●
LINK parameters
The parameter may assume the number of another parameter as value.
13 DIGITAL OUTPUTS
14 ANALOG INPUTS
15 ANALOG OUTPUTS
16 MOTOR DATA
17 ENCODER CONFIG
13 DIGITAL OUTPUTS
13.01
PAR: 1410
Dig output 1X src
»Null
Value: 6000
E
13 DIGITAL OUTPUTS
13.01
PAR: 1410
Dig output 1X src
»Null
Value: 6000
13 DIGITAL OUTPUTS
13.01
PAR: 1410
Dig output 1X src
»Mot thr overtemp mon
Value: 3514
13 DIGITAL OUTPUTS
13.01
PAR: 1410
Dig output 1X src
»One
Value: 6002
Press
E
to activate modification mode. The entire line is displayed in reverse. The elements of the list of parameters
associated with this parameter can be scrolled using the ▲ and ▼ keys.
Press
E
to confirm the modification or
ESC
to cancel.
●
ENUM parameters
The parameter may assume only the values contained in a selection list.
01 MONITOR
02 DRIVE INFO
03 STARTUP WIZARD
04 DRIVE CONFIG
05 REFERENCES
x3
04 DRIVE CONFIG
04.04
PAR: 554
Access mode
Easy
Value: 0
E
04 DRIVE CONFIG
04.04
PAR: 554
Access mode
Expert
Value: 1
Press
E
to activate modification mode. The entire line is displayed in reverse. The elements of the selection list can be
scrolled using the ▲ and ▼ keys.
Press
E
to confirm the modification or
ESC
to cancel.
●
Execution of commands
A parameter can be used to carry out a number of operations on the drive. For an example, see next paragraph: in this
case the request "
Press E to execute
" is displayed.
To execute the command, press
E
. During execution of the command, the “
In progress
” caption is displayed to
indicate that the operation is in course. At the end of execution, if the result is positive, the “
Done
” caption is displayed
for few seconds. If execution has failed, an error message is displayed.
8.3.6 How to save parameters
To save parameters in the non-volatile memory of the drive:
Menu 04 DRIVE CONFIG, parameter 04.01
Save parameters
, PAR : 550. This is used to save changes to parameter
settings so that they are maintained even after power-off.
01 MONITOR
02 DRIVE INFO
03 STARTUP WIZARD
04 DRIVE CONFIG
05 REFERENCES
04 DRIVE CONFIG
04.01
PAR: 550
Save parameters
Press E to execute
E
04 DRIVE CONFIG
04.01
PAR: 550
Save parameters
In progress
04 DRIVE CONFIG
04.01
PAR: 550
Save parameters
Done
To exit, press the ◄ key.