
ADP200 • Quick installation guide - Specifications and connection
21
5.2.2 DC input chokes
Size
THD (%)
I
n
(@400V/50Hz, with DC
input chokes)
(A)
Model
Code
Dimensions: WxHxd
mm [inches]
Weight
kg [lbs]
2075
< 35 %
16
LDC-007
S7AI12
125 x 122 x 127 [4.92 x 4.8x5]
4.9 [10.8]
2110
21
LDC-011
S7AI13
125 x 142 x 127 [4.92 x 5.59 x 5]
6.6 [14.55]
3150
28
LDC-015
S7AI14
125 x 152 x1 27 [4.92 x 5.98 x 5]
8 [17.63]
3185
35
LDC-022
S7AI15
155 x 148 x 160 [4.92 x 5.82 x 6.3]
8.5 [18.74]
3220
40
LDC-022
S7AI15
155 x 148 x 160 [4.92 x 5.82 x 6.3]
8.5 [18.74]
4300
45
Internal choke
4370
40
4450
45
5550
50
5750
40
Note!
The DC input choke is not integrated and can not be connected on ADP200-5S550 / ADP200-5S750 sizes.
5.3 AC output chokes
The ADP200 inverter can be used with standard motors or motors designed specifically for use with inverters.
The latter usually have a higher isolation rating to better withstand PWM voltage. Examples of reference regulations
are provided below: motors designed for use with inverters do not require any specific filtering of output from the
inverter. For standard motors, especially with long cable runs (typically over 100 m) an output choke may be necessary
to maintain the voltage waveform with the specified limits.
The range of recommended chokes are listed in the following table. The rated current of the chokes should be approx.
20% higher than that of the inverter in order to take into account additional losses due to modulation of the output
waveform.
Size
Model
Code
Dimensions: WxHxd
mm [inches]
Weight
kg [lbs]
2075
LU3-011
S7FG4
180 x 185 x130
8 [17.64]
2110
LU3-011
S7FG4
180 x 185 x130
8 [17.64]
3150
LU3-015
S7FH2
180 x 185 x140
7 [15.43]
3185
LU3-022
S7FH3
180 x 185 x160
8.2 [18.08]
3220
LU3-022
S7FH3
180 x 185 x160
8.2 [18.08]
4300
LU3-030
S7FH4
180 x 185 x170
10 [22.05]
4370
LU3-037
S7FH5
180 x 185 x170
10 [22.05]
4450
LU3-055
S7FH6
240 x 216 x170
16 [35.27]
5550 / 5S550
LU3-055
S7FH6
240 x 216 x170
16 [35.27]
5750 / 5S750
LU3-090
S7FH10
180 x 165 x195
15 [33.07]
Note!
With the inverter operated at the rated current and a frequency of 50 Hz, the output chokes cause a voltage drop of approx. 2% of the output voltage.