GE Voluson P8 BT16, Базовое руководство по обслуживанию

Страница: 283 / 612

GE DRAFT V
OLUSON
™ P8 / V
OLUSON
™ P6
DIRECTION 5723243, R
EVISION
6 DRAFT (M
AY
23, 2018) B
ASIC
S
ERVICE
M
ANUAL
Chapter 5 - Components and Functions (Theory) 5-75
5-17-6 Advanced Functions Menu
1.) If system functionality allows it, collect vital system information as described in Section 5-17-8 "After
Recovering or Initializing the Hard disk" on page 5-80 .
2.) Enter Linux as described in Section 5-17-2 "Access/Security" on page 5-61 .
3.) In the “Voluson Maintenance System” main menu ( Figure 5-35 ) select [Advanced].
The “Advanced Functions Menu” with following functions appear:
5-17-6-1 Exit
Return to the “Voluson Maintenance System” main menu.
5-17-6-2 Network
This item provides an easy interface for network setup.
The [Network] function is not intended for use in the field.
5-17-6-3 SSHD
By selecting this item, a SSH-daemon is started on the system.
The [SSHD] function is reserved for extended troubleshooting. Not intended for use in the field.
5-17-6-4 Restore C : from recovery partition(R:)
This image stored on the Rescue (R:) partition is used to replace the existing image of the
“C” partition.
NOTE: Data on the D: [User] partition (e.g., Patient Archive images, Measurement results, Patient Data and
Reports)
will NOT be modified!
NOTE: “Permanent key” is required!( Utilities - System Setup - Administration - Option tab)
Figure 5-51 Advanced Functions Menu
NOTICE
The [Restore] function should only be performed if
NO
System DVD is available!
If you have a System DVD, please select the [Restore] function that is available in the
CD-ROM Functions Menu; see: Section 5-17-5 on page 5-65