GE Voluson P8 BT16, Базовое руководство по обслуживанию

Страница: 146 / 612

GE RAFT V
OLUSON
™ P8 / V
OLUSON
™ P6
DIRECTION 5723243, R
EVISION
6 DRAFT (M
AY
23, 2018) B
ASIC
S
ERVICE
M
ANUAL
3-78 Section 3-13 - Network Configuration
5.) Select the Security tab and then click Add .
6.) Add the following information to the Wireless Network Properties page:
- Network Name(SSID)
- Check box “ Connect even if Network is not Broadcasting its Name (SSID)”
- network Authentication (Open, Shared key, WPA PSK or WPA2 PSK)
- Date Encryption
- Network Key
- Key Index
7.) After you have filled in all the required information, click OK .
3-13-2-4 Refreshing a WLAN Network
1.) Press the “Utilities” key on the control console.
2.) On the right side of the screen select Connectivity and then click the Device Setup tab.
3.) Click the WLAN Configuration button; see Section Figure 3-76 on page 3-75
4.) The Wireless Network Configuration tool with available Wireless Networks appear.
5.) Click Refresh .
3-13-2-5 Setting a WLAN Network as Non-Preferable
When you make a WLAN non-preferable, you disconnect the network from the system and delete all
connection settings from the system. Afterwards the system WILL NOT try to reconnect to this WLAN
automatically. And if you want to reconnect, you will need to re-add this WLAN.
1.) Press the “Utilities” key on the control console.
2.) On the right side of the screen select Connectivity and then click the Device Setup tab.
3.) Click the WLAN Configuration button; see Section Figure 3-76 on page 3-75
4.) The Wireless Network Configuration tool with available Wireless Networks appear.
5.) Highlight the wireless network you want to set as non-preferred.
6.) Click Make Non-Preferable and cinfirm the message box.
Figure 3-79 Security - Add