GE Voluson i BT06, Руководство по обслуживанию

Страница: 96 / 516

GE V
OLUSON
i / V
OLUSON
e
D
IRECTION
KTI106052, R
EVISION
10 S
ERVICE
M
ANUAL
3-26 Section 3-5 - Connection of Auxiliary Devices
3-5-1-1 Attaching the Voluson i / Voluson e to the Modo Cart
(cont’d)
3.) Connect the L-shaped circular power cable plug of the AC Adapter to the power inlet plug DC IN on
the rear of the Voluson i / Voluson e unit (see: Figure 3-20 below).
4.) Plug the other end of the power extender cable to an outlet of the transformer on the Modo Cart.
5.) Put the AC adapter beside the transformer into the shelf and fasten it (see:
Figure 3-21 below).
6.) Place the DVD Drive on the upper peripheral shelf of the Modo Cart and fasten it.
7.) Take a power extender cable and plug it into the adapter of the DVD Drive; the other end connect
to an on-board outlet of the isolation transformer on the Modo Cart.
8.) Plug the power cable and the USB-cable into the DVD-drive; the other end of the USB cable plug
to an USB port on the rear of the Voluson i / Voluson e.
9.) Mount and connect other peripherals as described in Section 3-5-1-2 and Section 3-5-1-3 .
10.)Connect the main power cable to the isolation transformer of the Modo Cart; the other end connect
to a hospital-grade main power outlet with the proper rated voltage.
11.)Press the Circuit breaker on the Modo Cart. To start up the system, press the
On/Off
button
(see: Figure 3-87 ) on the control panel of the Voluson i / Voluson e system (for ~3 seconds).
Figure 3-20 main power cable connected to Voluson i / Voluson e´s power inlet (DC IN) connector
Figure 3-21 Isolation Transformer of Modo Cart / Peripherals mounted and secured
protection plate
L-shaped circular
plug of power cable
connected to DC IN
Upper storage shelf
(for DVD+/R/RW Drive)
Middle storage shelf
(e.g., Color printer)
Lower storage shelf
(e.g., B&W printer)
Bottom shelf
Isolation Transformer,
AC/DC Adapter
on-board outlets for peripheals
main power cable + pull out protection
AC Adapter
Circuit breaker on Modo Cart
(power extender cables connected)