GE Voluson i BT06, Руководство по обслуживанию

Страница: 128 / 516

GE V
OLUSON
i / V
OLUSON
e
D
IRECTION
KTI106052, R
EVISION
10 S
ERVICE
M
ANUAL
3-58 Section 3-5 - Connection of Auxiliary Devices
3-5-13-2 Voluson i / Voluson e mounted on Modo Cart
NOTE: For instructions see: Section 3-5-1-3 "Mounting large Peripherals (e.g., Color Printer)" on page 3-28 .
The VCR must be powered from the Modo Cart itself, via one of the isolated peripheral power cables
provided on the Modo Cart. The video signal is received through a VGA-to-video converter, and this
must also be powered through one of the peripheral power outlets available on the Modo Cart.
1.) Connect one end of the VGA cable to SVGA OUT located on the Voluson i / Voluson e rear
connector panel.
2.) Connect the other end of the VGA cable to RGB IN on the video converter (rear).
3.) Connect one end of the S-Video cable to S-VIDEO OUT on the video converter.
4.) Connect the other end of the S-Video cable to S-VIDEO IN at the rear of the VCR.
NOTE: Dip switches are located beneath the video converter, as shown in Figure 3-71 on page 3-57 .
5.) Set the switches to the correct positions, as shown in Figure 3-72 on page 3-57 .
6.) When all power and signal cables are connected to the system, VCR, and video converter, proceed
as follows (
in the order stated
):
a.) Press the power ON switch on the VCR.
b.) Press the power ON switch on the video converter.
c.) Turn ON power to the Voluson i / Voluson e system.
7.) Press the
Input Select
button (see Figure 3-71 on page 3-57 ) on the video converter
three
times
in order to select RGB Input as your signal source.
The LED located on the video converter front panel will be illuminated, accordingly.
3-5-13-3 Voluson i / Voluson e mounted on Dock Cart
NOTE: For instructions see: Section 3-5-2-6 "Mounting large Peripherals (e.g., Color Printer)" on page 3-34 .
The VCR must be powered from the Dock Cart itself, via one of the isolated peripheral power cables
provided on the Dock Cart. The video signal is received through a VGA-to-video converter, and this
must also be powered through one of the peripheral power outlets available on the Dock Cart.
1.) Connect one end of the VGA cable to SVGA OUT located on the Voluson i / Voluson e rear
connector panel.
2.) Connect the other end of the VGA cable to RGB IN on the video converter (rear).
3.) Connect one end of the S-Video cable to S-VIDEO OUT on the video converter.
4.) Connect the other end of the S-Video cable to S-VIDEO IN at the rear of the VCR.
NOTE: Dip switches are located beneath the video converter, as shown in Figure 3-71 on page 3-57 .
5.) Set the switches to the correct positions, as shown in Figure 3-72 on page 3-57 .
6.) When all power and signal cables are connected to the system, VCR, and video converter, proceed
as follows (
in the order stated
):
a.) Press the power ON switch on the VCR.
b.) Press the power ON switch on the video converter.
c.) Turn ON power to the Voluson i / Voluson e system.
Press the
Input Select
button (see Figure 3-71 on page 3-57 ) on the video converter
three
times in
order to select RGB Input as your signal source.
The LED located on the video converter front panel will be illuminated, accordingly.