GE Voluson i BT06, Руководство по обслуживанию

Страница: 421 / 516

GE V
OLUSON
i / V
OLUSON
e
D
IRECTION
KTI106052, R
EVISION
10 S
ERVICE
M
ANUAL
Chapter 8 - Replacement Procedures 8-79
8-20-18 Replacement of the Bottom Column Front Cover
8-20-18-1 Manpower
One person, 20 minutes
8-20-18-2 Tools
Phillips screwdriver 1
8-20-18-3 Preparations
1.) Power Off/Shutdown the system as described in Section 3-6-3 on page 3-72 .
2.) Remove the optional Additional Shelf Peripherals as described in Section 8-20-6 on page 8-65 .
3.) Remove the optional Cover BW Printer Shelf as described in Section 8-20-7 on page 8-66 .
4.) Remove the optional Console Bottom Shelf as described in Section 8-20-8 on page 8-67 .
5.) Remove the Top Shelf Additional Bottom Cover as described in Section 8-20-12 on page 8-72 or
remove the optional Probe Mux Bos as described in Section 8-20-9 on page 8-68 .
6.) Remove the Power Supply Cover as described in Section 8-20-11 on page 8-71 .
7.) Remove the Top Shelf Bottom Rear Cover as described in Section 8-20-13 on page 8-73 .
8.) Remove the Top Column Back Cover as descibed in Section 8-20-14 on page 8-74 .
9.) Remove the Bottom Column Back Cover as described in Section 8-20-15 on page 8-75 .
10.)Remove the Top Column Front Cover as described in Section 8-20-17 on page 8-77 .
8-20-18-4 Bottom Column Front Cover - Removal Procedure
1.) Screw off 2 screws from the front top of the Bottom Column Front Cover and carefully remove it.
8-20-18-5 Bottom Column Front Cover - Installation Procedure
1.) Place the new Bottom Column Front Cover and fasten it with the 2 screws.
2.) Mount the Top Column Front Cover as described in
Section 8-20-17-5 on page 8-78 .
3.) Mount the Bottom Column Back Cover as described in Section 8-20-15-5 on page 8-75 .
4.) Mount the Top Column Back Cover as descibed in Section 8-20-14-5 on page 8-74 .
5.) Mount the Top Shelf Bottom Rear Cover as described in Section 8-20-13-5 on page 8-73 .
6.) Mount the Power Supply Cover as described in Section 8-20-11-5 on page 8-71 .
7.) Mount the Top Shelf Additional Bottom Cover as described in Section 8-20-12-5 on page 8-72 or
mount the optional Probe Mux Box as described in Section 8-20-9-5 on page 8-69 .
8.) Mount the optional Console Bottom Shelf as described in Section 8-20-8-5 on page 8-67 .
9.) Mount the optional Cover BW Printer Shelf as described in Section 8-20-7-5 on page 8-66 .
10.)Mount the optional Additional Shelf Peripherals as described in Section 8-20-6-5 on page 8-65 .
Figure 8-100 unscrew the 2 screws