GE Voluson i BT06, Руководство по обслуживанию

Страница: 63 / 516

GE V
OLUSON
i / V
OLUSON
e
D
IRECTION
KTI106052, R
EVISION
10 S
ERVICE
M
ANUAL
Chapter 2 - Site-Preparation 2-1
Chapter 2
Site-Preparation
Section 2-1
Overview
2-1-1 Purpose of Chapter 2
This chapter provides the information required to plan and prepare for the installation of a
Voluson i / Voluson e ultrasound unit.
Included are descriptions of the facility and electrical needs to be met by the purchaser.
Section 2-2
General Console Requirements
2-2-1 Environmental Requirements
2-2-1-1 Cooling
The cooling requirement for the Voluson i / Voluson e is 300 BTU/hr. This figure does not include cooling
needed for lights, people, or other equipment in the room.
NOTE: Each person in the room places an additional 300 BTU/hr demand on the cooling system.
2-2-1-2 Lighting
Bright light is needed for system installation, updates and repairs. However, operator and patient
comfort may be optimized if the room light is subdued and indirect. Therefore a combination lighting
system (dim/bright) is recommended. Keep in mind that lighting controls and dimmers can be a source
of EMI which could degrade image quality. These controls should be selected to minimize possible
interference.
Table 2-1 Contents in Chapter 2
Section Description Page Number
2-1
Overview
2-1
2-2
General Console Requirements
2-1
2-3
Facility Needs
2-5
Table 2-2 Environmental Requirements
Operating
Temperature
Operating
Humidity
Heat Dissipation
Storage
Temperature
Storage
Humidity
Air Pressure
10 to 30
o
C
(50 to 86
o
F)
30 to 80% rH
non-condensing
300 BTU pr hour
-10 to 40
o
C
(14 to 104
o
F)
< 90% rH
non-condensing
700 - 1060 hPa
CAUTION
!! CAUTION:
If the system has been in storage or has been transported, please see the acclimation requirements
before
powering
ON
and/or using the system. See ”
Installation Warnings” on page 3-2