GE Vivid S5 N, Руководство по обслуживанию

Страница: 684 / 834

GE
P
ART
N
UMBER
FN091065, R
EVISION
2 VS5 N
AND
VS6 N
S
ERVICE
M
ANUAL
8-158 Section 8-6 - Lower Section Components Replacement Procedures
P R E L I M I N A R Y
NOTE: Although the securing screws have been removed from the RFI Board ( step 7 ), it is still secured
on the cabinet cage assembly by way of a metal spline. It is necessary to perform the next step
in order to release the RFI Board and so facilitate its removal from the cage assembly.
10) Using a flat screwdriver, push down the metal spline to release the RFI Board from the fastened
position, as shown in Figure 8-194 .
11) Carefully lift the RFI and TR32 Board out of the cage assembly - together with the Heat Sink - as
shown in Figure 8-195 below.
(The RFI and TR32 Boards are seated together in the system as one unit).
NOTE: The Heat Sink pad on the RFI Board (shown in Figure 8-195 , above) is adhered in position and
should be re-used.
Figure 8-194 Releasing the Spline
Figure 8-195 Removing the RFI and TR32 Boards
Screwdriver
Spline
Heat Sink Pad