GE Vivid S5 N, Руководство по обслуживанию

Страница: 315 / 834

GE
P
ART
N
UMBER
FN091065, R
EVISION
2 VS5 N
AND
VS6 N
S
ERVICE
M
ANUAL
Chapter 4 - Functional Checks 4-45
P R E L I M I N A R Y
Section 4-5
System Turnover Checklist
Before returning the Vivid S5 N or Vivid S6 N ultrasound scanner to regular operational use, the System
Configuration settings should be checked. In 2D-Mode, press
Config on the keyboard and check the
settings in accordance with those listed or referenced in Table 4-25 "Software Configuration Checklist"
on page 4-45
4-5-1 Software Configuration Checks
Table 4-25 Software Configuration Checklist
Step Task Check
1 Check the date and time settings. Refer to ‘Date and Time Adjustments” on page 3-81 .
2
Check the language settings.Refer to ‘Language Selection” on page 3-82 .
3
Ensure that all of the software options are configured correctly. Refer to ‘Software
Options Configuration” on page 3-95 .
4 Ensure that the hospital details are configured correctly. Refer to Table 3-2 on page 80.
6
Ensure that the measurement units are configured as required for the specific site and
country.Refer to
‘Units of Measure” on page 3-84 .
7
Ensure that the connectivity network settings have not been modified and are configured
as required for the specific site. Refer to
‘Set the Scanner’s Network Information” on
page 3-110 .
8
Ensure that the Monitor - Internal (and External, if required) is properly adjusted. Refer to
6-1-2 "LCD Display Adjustments and Calibration" on page 6-1