GE Vivid S5 N, Руководство по обслуживанию

Страница: 284 / 834

GE
P
ART
N
UMBER
FN091065, R
EVISION
2 VS5 N
AND
VS6 N
S
ERVICE
M
ANUAL
4-14 Section 4-2 - General Procedures
P R E L I M I N A R Y
4-2-6 Labeling Removable Media
Before you start to format any Removable Media, be sure about what naming convention you will use
for labelling.
• Use a logical name and make sure to physically label each Removable Media.
• Verify that each Removable Media is given a unique name. Maximum eleven (11) characters may
be used for the label name (see note below).
NOTE: Only the following characters and signs can be used when labelling media:
A-Z, a-z, 0-9, “_” and “-”.
Do not use more than 11 characters or signs. Also, do not use spaces or symbols.
• Remember that MO Disks have two sides, Side A and Side B. Each Side must have a unique name.
Example: MO Disks for storing images may be labeled “IMAGE_1A” (Side A on MO Disk #1), “IMAGE_1B
(Side B on MO Disk #2), “IMAGE_2A”...
4-2-7 Formatting Removable Media
This procedure describes how to format an MO Disk or a CD-R disk.
Before you continue, be sure about what naming convention you will use for labelling the Removable Media.
1.) Select Config > Connectivity > Tools.
2.) Select the removable media from the Media pop-up menu .
3.) Enter a name for the removable media in the Label field .
4.) Press Format .
5.) Wait for display of the Information window, indicating that the formatting process is completed.
6.) Press the Eject button on the keyboard or <Alt> + E on the alphanumeric keyboard to display the
Eject Device menu (see Figure 4-8 "Eject Device Menu" on page 4-13 ).
7.) Select the relevant media.
The selected media is ejected.
NOTICE
Do not eject the CD using the button on the CD drive.