GE Vivid S5 N, Руководство по обслуживанию

Страница: 276 / 834

GE
P
ART
N
UMBER
FN091065, R
EVISION
2 VS5 N
AND
VS6 N
S
ERVICE
M
ANUAL
4-6 Section 4-2 - General Procedures
P R E L I M I N A R Y
4-2-2 Power ON/Boot-up
(cont’d)
c.) The Back-End Processor and the rest of the scanner commences the following sequence (in
the listed order of steps):
1.) Back-End Processor is turned ON and starts to load the software.
2.) The Start Screen is displayed on the monitor ( Figure 4-5 "Start-up Screen" on page 4-6 ).
3.) A start-up progress bar indicating the time used for software loading, is displayed.
4.) The software initiates and sets up the Front-End electronics and the rest of the scanner.
5.) The Keyboard backlight illuminates.
6.) As soon as the software has been loaded, a 2D screen is displayed on the monitor, as
shown below.
NOTE: Total time used for start-up is typically 3 minutes.
Figure 4-5 Start-up Screen
Figure 4-6 2D Screen