GE Vivid S5 N, Руководство по обслуживанию

Страница: 298 / 834

GE
P
ART
N
UMBER
FN091065, R
EVISION
2 VS5 N
AND
VS6 N
S
ERVICE
M
ANUAL
4-28 Section 4-3 - Functional Checks
P R E L I M I N A R Y
4
Adjacent to On Fail, select either Stop or Continue , as
required.
5 Trackball to the Start button and press Set
The test commences.
When the ADC Test sequence is complete, the View
Test Log window opens automatically, listing the test
performed and showing whether it passed or failed -
see the examples in
Figure 7-29 on page 7-54 and
Figure 7-30 on page 7-55.
6
Use the scroll arrows at the bottom of the Reports
window to scroll through the channels and view the
corresponding results.
RX TEST
1 Trackball to RX Test and press Set .
2
Disconnect any probes currently connected to the
system and make sure that nothing is touching the probe
connectors.
3
Under the Special Instructions area, activate the Loops
checkbox and select the required number of Loops from
the combo box.
4
Adjacent to On Fail, select either Stop or Continue , as
required.
5 Trackball to the Start button and press Set
The test commences.
When the RX Test sequence is complete, the View
Test Log window opens automatically, listing the test
performed and showing whether it passed or failed -
see the examples in
Figure 7-34 on page 7-59 and
Figure 7-35 on page 7-60.
6
Use the scroll arrows at the bottom of the Reports
window to scroll through the channels and view the
corresponding results.
ACW TESTS .
ACW IQ Symmetry Test
1 Trackball to ACW IQ Symmetry Test and press Set .
2
Disconnect any probes currently connected to the
system and make sure that nothing is touching the probe
connectors.
3
Under the Special Instructions area, activate the Loops
checkbox and select the required number of Loops from
the combo box.
4
Adjacent to On Fail, select either Stop or Continue , as
required.
Table 4-12 Front End Tests (cont’d)
Step Task Expected Result(s)