GE Vivid 7, Руководство по обслуживанию

Страница: 512 / 858

GE H
EALTHCARE
D
IRECTION
FC091194, R
EVISION
11 V
IVID
7 S
ERVICE
M
ANUAL
6 - 12 Section 6-8 - Direction Lock and Brake Adjustment
6-8-3 Rear Brakes Adjustment
6-8-3-1 Manpower
2 persons, 1 hour
6-8-3-2 Tools
• Hexagon key 3/32 inch
• Phillips screw driver size 2
6-8-3-3 Preparations
1.) Remove Filter Cover , see "Upper Rear Cover Removal Procedure" on page 8-6 .
2.) Remove Lower Rear Cover , see "Lower Rear Cover Removal Procedure" on page 8-10 .
3.) Remove the Caster , see "Rear Casters Removal Procedure" on page 8-92
6-8-3-4 Rear Brakes Adjustment
1.) Use a 3/32 inch hexagon key to adjust the brake until the space between brakedogs and tires are
approximate 2 mm.
1.) Replace the Caster and tightly fasten it with four screws.
2.) Install Lower Rear Cover , see "Lower Rear Cover Installation Procedure" on page 8-10 .
3.) Install Filter Cover , see "Upper Rear Cover Installation Procedure" on page 8-6 .
4.) Remove the Wooden Wedge.
5.) Roll the system off the Bevel Edged Board.
Figure 6-7 Rear Brakes adjustment
WARNING WARNING Use extreme caution in the next two steps. The scanner will be unstable.