GE Vivid 7, Руководство по обслуживанию

Страница: 189 / 858

GE H
EALTHCARE
D
IRECTION
FC091194, R
EVISION
11 V
IVID
7 S
ERVICE
M
ANUAL
Chapter 3 - System Setup 3 - 65
3-9-14-6 DICOM Storage Properties Adjustments
IP-address
1.) Select the down-arrow at the IP-Address pull-down menu to select the DICOM Storage server .
2.) Select
<modify>
from the pull-down menu if you need to modify the server’s parameters or add a
new server. This will bring up the
IPs
dialog.
If no changes are needed, continue with step 7 .
3.) To modify any of the settings, select the server you want to modify, and then select
Modify
. This
will bring up the
Enter name and Ip
dialog.
4.) In the
Enter name and Ip
dialog you can modify the server’s name and IP-address.
- Select
OK
to save the new settings and close the dialog.
-
Select Cancel
to close the dialog without saving the changes.
5.) If you want to add a new server, select
Add
in the
IPs
dialog.
a.) Type the server’s name and IP-address in the
Enter name and Ip
dialog.
b.) Select
OK
to save the new settings and close the dialog.
Cancel
will close the dialog without
saving the changes.
6.) Follow these steps if you want to delete any of the servers from the list:
a.) Select the server you want to delete, and then select
Delete
. This will bring up a warning where
you are asked if you want to delete the server from the list.
b.) Select
OK
to confirm or
Cancel
if you don’t want to delete the server.
Figure 3-65 IP Adjustments
Figure 3-66 The IPs dialog