manualshive.com logo in svg

GE Multilin g60, Инструкция по эксплуатации

Это надежное решение для защиты систем распределения энергии. GE Multilin g60 предлагает широкий выбор функций и возможность конфигурирования. Инструкция по эксплуатации доступна для скачивания совершенно бесплатно на manualshive.com. Убедитесь в правильной работе вашего оборудования, загрузив руководство по эксплуатации прямо сейчас.

Поделиться
Скачать
background image

4-4

G60 Generator Protection System

GE Multilin

4.2 EXTENDED ENERVISTA UR SETUP FEATURES

4 HUMAN INTERFACES

4

4.2EXTENDED ENERVISTA UR SETUP FEATURES

4.2.1 SETTINGS TEMPLATES

Setting file templates simplify the configuration and commissioning of multiple relays that protect similar assets. An exam-
ple of this is a substation that has ten similar feeders protected by ten UR-series F60 relays.

In these situations, typically 90% or greater of the settings are identical between all devices. The templates feature allows
engineers to configure and test these common settings, then lock them so that they are not available to users. For exam-
ple, these locked down settings can be hidden from view for field engineers, allowing them to quickly identify and concen-
trate on the specific settings.

The remaining settings (typically 10% or less) can be specified as editable and be made available to field engineers install-
ing the devices. These are settings such as protection element pickup values and CT and VT ratios.

The settings template mode allows the user to define which settings are visible in EnerVista UR Setup. Settings templates
can be applied to both settings files (settings file templates) and online devices (online settings templates). The functionality
is identical for both purposes.

Settings files conversion from previous firmware versions is supported.

a) ENABLING THE SETTINGS TEMPLATE

The settings file template feature is disabled by default. The following procedure describes how to enable the settings tem-
plate for UR-series settings files.

1.

Select a settings file from the offline window of the EnerVista UR Setup main screen.

2.

Right-click the selected device or settings file and select the 

Template Mode > Create Template

 option.

The settings file template is now enabled and the file tree displayed in light blue. The settings file is now in template editing
mode.

Alternatively, the settings template can also be applied to online settings. The following procedure describes this process.

1.

Select an installed device from the online window of the EnerVista UR Setup main screen.

2.

Right-click the selected device and select the 

Template Mode > Create Template

 option.

The software prompts for a template password. This password is required to use the template feature and must be at
least four characters in length.

3.

Enter and re-enter the new password, then click 

OK

 to continue.

The online settings template is now enabled. The device is now in template editing mode.

b) EDITING THE SETTINGS TEMPLATE

The settings template editing feature allows the user to specify which settings are available for viewing and modification in
EnerVista UR Setup. By default, all settings except the FlexLogic equation editor settings are locked.

1.

Select an installed device or a settings file from the tree menu on the left of the EnerVista UR Setup main screen.

2.

Select the 

Template Mode > Edit Template

 option to place the device in template editing mode.

3.

Enter the template password then click 

OK

.

4.

Open the relevant settings windows that contain settings to be specified as viewable.

Содержание Multilin g60













































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Multilin g60

KEENZ Class Instruction Manual preview
Class
Бренд: KEENZ Страницы: 24
Samsung SSA-P400 User Manual preview
SSA-P400
Бренд: Samsung Страницы: 27
Gardena Master Operator'S Manual preview
Master
Бренд: Gardena Страницы: 18
Danfoss VLT Micro Drive FC 51 Series Quick Manual preview
VLT Micro Drive FC 51 Series
Бренд: Danfoss Страницы: 23
Fanimation BTCR9 Quick Start Manual preview
BTCR9
Бренд: Fanimation Страницы: 2
M2M C600 Technical Manual preview
C600
Бренд: M2M Страницы: 24
Kamstrup M-Bus Manual preview
M-Bus
Бренд: Kamstrup Страницы: 36
JFA Electronicos K1200 Instruction Manual preview
K1200
Бренд: JFA Electronicos Страницы: 29
Oceanic DX1 Product Service Manual preview
DX1
Бренд: Oceanic Страницы: 11
Quickie DX2-REM550 User Manual preview
DX2-REM550
Бренд: Quickie Страницы: 64
Kamstrup 66-0F-000-100 Installation Manual preview
66-0F-000-100
Бренд: Kamstrup Страницы: 7
Case IH MAXXUM 100 Service Manual preview
MAXXUM 100
Бренд: Case IH Страницы: 81
Daikin BRC1H81W Installer And User Reference Manual preview
BRC1H81W
Бренд: Daikin Страницы: 40
Carel EVD mini User Manual preview
EVD mini
Бренд: Carel Страницы: 36
Handiquilter IN50005 Installation Instructions Manual preview
IN50005
Бренд: Handiquilter Страницы: 53
Astrosyn P542 User Manual preview
P542
Бренд: Astrosyn Страницы: 7
Morningstar SUNSAVER SS-10-12V Installation And Operation Manual preview
SUNSAVER SS-10-12V
Бренд: Morningstar Страницы: 26
NovaStar NovaPro UHD Manual preview
NovaPro UHD
Бренд: NovaStar Страницы: 11

Бренды по названию

Популярные бренды

Загрузить еще бренды