manualshive.com logo in svg

GE Multilin F650, Инструкция по эксплуатации

Инструкция по установке ГЕ Мультилин F650 доступна для загрузки совершенно бесплатно на нашем сайте. Этот руководство поможет вам правильно настроить и использовать ваш продукт, обеспечивая эффективное и безопасное использование. Скачайте ее прямо сейчас с manualshive.com.

Поделиться
Скачать
background image

4-20

F650 Digital Bay Controller

GEK-106310AB

4.1 ENERVISTA 650 SETUP SOFTWARE INTERFACE 4 HUMAN INTERFACES. SETTINGS & ACTUAL VALUES

4

4.1.8.5   INPUT/OUTPUTS

Section that contains the settings for all input and output boards and the Force Outputs and Virtual inputs activation tools. 

Table 4.12:  GENERAL OVERVIEW OF "INPUTS/OUTPUTS" SETTINGS MENU. 

Options enabled only in On-line mode are marked as (*). Options enabled only in Off-line mode are marked as (**)

This section shows the settings related to inputs and outputs for the different boards available in F650 (F, G, H, J).

Table 4.13:  GENERAL OVERVIEW OF "INPUTS/OUTPUTS>CONTACT I/O" SETTINGS MENU. 

4.1.8.6   RELAY CONFIGURATION

This is the relay configuration section in which the relay can be configured using internal states or already compiled
equation on PLC Editor.

Table 4.14:  GENERAL OVERVIEW OF RELAY CONFIGURATION MENU:

Frequency rate of 
change

Frequency rate of change function (81R).Grouped element.

Load Encroachment

Load Encroachment function. Grouped element.

INPUTS/
OUTPUTS

Contact I/O

Inputs and outputs settings for all boards in F650. The I/O settings
configuration can only be performed through EnerVista 650 Setup, not
HMI available.

Force Outputs (*)

This menu allows activating each contact output in the relay, to facilitate
maintenance testing. On line mode only. 

Virtual Inputs (*)

This menu allows operating virtual inputs. These variables are used as
inputs to logic schemes configured in the relay. Virtual inputs can be
operated in a latched mode (32 latched virtual inputs) or in Self-reset
mode (32 self reset virtual inputs).

Remote Comms.

This menu allows configuring remote inputs coming from other devices
through GSSE messages. Available for IEC61850 (6) models only.

CONTACT I/O

Board F

Board located in first slot, always connected.

Board G

Board located in second slot, depends on model definition. If model is 
type G0 there is no board in second slot.

Board H

Board located in first slot of CIO Module (external inputs/outputs module)

Board J

Board located in second slot of CIO Module (external inputs/outputs
module)

RELAY CONFIG

Outputs

Configuration of contact output operate and reset signals for all boards.

LEDs

15 LEDs fully configurable from any logical variable, contact or virtual
input. First 5

 

LEDs are latched by hardware, the rest are self-reset but

can be latched through PLC configuration. From the LED configuration
screen, it is possible to print the vertical LED label for the relay.

Operations

Configurable operations up to 24. Operation texts, interlocks, final states,
frontal keys, time outs and masters.

Protection Elements

This tab allows assigning operands (logic signals) as inputs to different
protection elements. To block, reset, initiate the different protection
elements inputs. 

Oscillography

Trigger and up to 16 digital channels to be included in oscillography
records, are programmable from any logical variable, contact or virtual
input. Text configuration is only for off-line mode.

NOTE:

 This screen is used for the configuration of digital channels and

oscillography trigger. The rest of parameters, such as function enabling/
disabling, sampling rate, number of oscillography files, etc. must be set
on the 

Setpoint>Product Setup>Oscillography

 menu.

Содержание Multilin F650


































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Multilin F650

QCON ProX Setup preview
ProX
Бренд: QCON Страницы: 4
Baby Trend 7548 Instruction Manual preview
7548
Бренд: Baby Trend Страницы: 8
Baby Trend 7311 Instruction Manual preview
7311
Бренд: Baby Trend Страницы: 19
Baby Trend 1305 Instruction Manual preview
1305
Бренд: Baby Trend Страницы: 5
Baby Trend 1140RC Instruction Manual preview
1140RC
Бренд: Baby Trend Страницы: 4
Parker CK5-DN Quick Start Manual preview
CK5-DN
Бренд: Parker Страницы: 4
HEIDENHAIN ND 1300 Operating Instructions Manual preview
ND 1300
Бренд: HEIDENHAIN Страницы: 257
Xylem LOWARA Aquavara IPC Quick Start Manual preview
LOWARA Aquavara IPC
Бренд: Xylem Страницы: 292
Gimenez Ganga Saxun Mosquito Screen Lateral Door 2020 Assembly Manual preview
Saxun Mosquito Screen Lateral Door 2020
Бренд: Gimenez Ganga Страницы: 2
Keysight Technologies J-BERT M8020A Installation Manual preview
J-BERT M8020A
Бренд: Keysight Technologies Страницы: 78
Bentel KYO 32 M Installation Manual preview
KYO 32 M
Бренд: Bentel Страницы: 88
Zenith ZH210 Owner'S Manual preview
ZH210
Бренд: Zenith Страницы: 20
ICP DAS USA ALM-04-MRTU User Manual preview
ALM-04-MRTU
Бренд: ICP DAS USA Страницы: 26
National Instruments cRIO-FRC II User Manual And Specifications preview
cRIO-FRC II
Бренд: National Instruments Страницы: 22
AUMA ACV 01.2 Manual preview
ACV 01.2
Бренд: AUMA Страницы: 168
Banner DX99N9X1S2N0M2X0D2 Manual preview
DX99N9X1S2N0M2X0D2
Бренд: Banner Страницы: 13
S&C Micro-AT Quick Start Programming Manual preview
Micro-AT
Бренд: S&C Страницы: 12
Quick HT94 Manual Of Installation And Use preview
HT94
Бренд: Quick Страницы: 16

Бренды по названию

Популярные бренды

Загрузить еще бренды