Fuji Xerox DocuPrint CM225FW Скачать руководство пользователя

Страница: 241 / 344

Using the Operator Panel Menus and Keypad

241

• Original Type

Purpose:
To select the copy image quality.
Values:

• Lighten / Darken

Purpose:
To set the default copy density level.
Values:

• Sharpness

Purpose:
To set the default sharpness level.
Values:

• Auto Background Suppression

Purpose:
To suppress the background of the original to enhance text on the scanned image.
Values:

• Color Balance

Color Balance

Purpose:
To specify the default color balance level within the range of -3 to +3.
Values:

Photo

Text

Suitable for documents with both text and photos/gray tones.

Text

Suitable for documents with text.

Photo

Suitable for documents with photos.

Lighten2

Makes the copy lighter than the original. Works well with dark print.

Lighten1
Normal

Works well with standard type or printed documents.

Darken1

Makes the copy darker than the original. Works well with light print or faint pencil
markings.

Darken2

Sharpen2

Makes the scanned image sharper than the original.

Sharpen1
Normal

Does not make the scanned image sharper or softer than the original.

Soften1

Makes the scanned image softer than the original.

Soften2

Off

Does not suppress the background.

Suppresses the background of the original to enhance text on the scanned image.

Red

-3 to +3

Sets the color balance level of density red.

Green

-3 to +3

Sets the color balance level of density green.

Blue

-3 to +3

Sets the color balance level of density blue.

Содержание DocuPrint CM225FW
























































































































































































































































































































































Результаты поиска

Содержание DocuPrint CM225FW

Отзывы:

Похожие инструкции для DocuPrint CM225FW

Бренды по названию

Популярные бренды

Fuji Xerox DocuPrint CM225FW, Руководство пользователя

Результаты поиска

Содержание DocuPrint CM225FW

Отзывы:

Похожие инструкции для DocuPrint CM225FW

Бренды по названию

Популярные бренды