Fuji Xerox DocuPrint CM225FW, Руководство пользователя

Страница: 113 / 344

Printing Basics 113
6
Specify the length of the short edge and long edge under Change Setting For .
You can specify the values either by entering them directly or using the up arrow and down arrow buttons. The
length of the short edge cannot be longer than the long edge even if it is within the specified range. The length
of the long edge cannot be shorter than the short edge even if it is within the specified range.
7
To assign a paper name, select the Name the Paper Size check box, and then enter the name in Paper Name .
Up to 24 characters can be used for the paper name.
8
If necessary, repeat steps 5 to 7 to define another custom size.
9
Click OK twice.
Printing on Custom Size Paper
Use the following procedures to print using the Windows print driver.
• Using the Windows Print Driver
This section explains the procedure using Windows 7 as an example.
NOTE:
• The way to display the printer Properties / Printing Preferences dialog box differs according to the application software.
Refer to the manual of your respective application software.
1
From the application menu, select Print .
2
Select your printer and click Preferences .
3
Select the Paper/Output tab.
4
Select the size of the document to be printed from Paper Size .
5
Select the paper type to be used from Paper Type .
6
Click the Layout tab.
7
From Output Size , select the custom size you defined. If you have selected the custom size from Paper Size
in step 4 , select Same as Paper Size .
8
Click OK .
9
Click Print in the Print dialog box to start printing.