Chapter 4 Operation
65
•
The inner door is designed so that users can view inside the test
area during cabinet operation. However, it can fog up during
operation at high temperature and high humidity. In such case,
turn the wiper knob until visibility is restored.
Also, the inner door can be locked and unlocked by the turning the
lock knob.
Wiper
Inner door
Wiper knob
Lock knob
Fig. 4.17 Inner door parts
•
Swinging the wipe inattentively can jam the tip between the inner
door and the cabinet door. If this happens, open the door and free
the wiper.
•
Before closing the inner door, check the wiper is not protruding
outside the inner door frame. Also, close the inner door slowly and
carefully.
•
Once a month, wipe the inner door clean with a soft cloth or by
other means.
•
If the cabinet is run with the inner door closed but the cabinet door
open, temperature pull-down rate, temperature uniformity and
other performance specifications will fall outside of guaranteed
levels.
Note
Reference
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
