Chapter 4 Operation
52
12. Step data enter command YES/NO
Select “YES” and press the
ENT.
key. Then, press the
NEXT
key.
Enter command
：
YES
Enters data and ends input for the current
step.
NO
Ends step input without entering the input
data.
ENT.
：
Enters the selection.
Stands for “Enter”.
○
PRGM SET
* If you perform another operation such as moving to
another step without first entering your step data, all the
unentered settings you made for that step will be
cancelled.
Press the
NEXT
key and move to the step edit content selection
(step 2 in this procedure).
Step 2 Setup
2. Select the step edit content selection STEP/END/SAVE.
To setup the next step No., select “STEP” and press the
ENT.
key.
3. Input the setup No.
Input “2” and press the
ENT.
key. Then, press the
NEXT
key.
4. Turn temperature (humidity) link control ON.
Select “ON” and press the
ENT.
key. Then, press the
NEXT
key.
5. Set target temperature.
Input “-20.0” and press the
ENT.
key. Then, press the
NEXT
key.
6. Turn humidity control OFF.
Select “OFF” and press the
ENT.
key. Then, press the
NEXT
key.
8. Set the step exposure time.
Input “2.00” and press the
ENT.
key. Then, press the
NEXT
key.
9. Turn soak control OFF.
Select “OFF” and press the
ENT.
key. Then, press the
NEXT
key.
10. Turn temperature ramp control ON.
Select “ON” and press the
ENT.
key. Then, press the
NEXT
key.
12. Enter step setup.
Select “YES” and press the
ENT.
key. Then, press the
NEXT
key.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
