Chapter 4 Operation
62
Monitoring by Remote Control
In the remote control monitor, you can view the current test area
temperature (and humidity), the target temperature (and humidity) for the
current step, the time remaining to step end and the exposure time set
for the current step.
Getting the remote control mode monitor
Set the main power switch in the ON position and press the POWER
key. The test area temperature (and humidity) monitor will be on the
display when the display comes ON.
1. Test area temperature (and humidity)
Test area temperature
Test area humidity (Not displayed with LU cabinet)
If humidity control has been turned OFF, “OFF” is displayed
here.
○
MONITOR
℃
SV
CONST.
RUN
%RH
REMOTE
Press the
NEXT
key and move to the next setting.
2. Target temperature (and humidity)
Target temperature
Target humidity (Not displayed with LU cabinet)
If humidity control has been turned OFF, “OFF” is displayed
here.
○
MONITOR
℃
SV
CONST.
RUN
%RH
REMOTE
Press the
NEXT
key and move to the next setting.
3. Time remaining to step end
Time remaining to step end (Counted down)
* Time is displayed either in the range of 00 (h): 00 (min) to 99
(h): 59 (min), or 100 to 999 hours.
○
MONITOR
PRGM
RUN
REM.TIME
h.
min
REMOTE
Press the
NEXT
key and move to the next setting.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
