ESPEC LH-113 Скачать руководство пользователя страница 63

Страница: 63 / 110

Chapter 4 Operation

Monitoring in the Program Mode

In the program mode monitor, you can view the current test area

temperature (and humidity), the target temperature (and humidity) for the

current step, the time remaining to step end, the exposure time set for

the current step and the set number of the repeat cycles if set in the

program.

Getting the program mode monitor

The test area temperature (and humidity) monitor will be on the display

when the display comes ON.

1. Test area temperature (and humidity)

Test area temperature

Test area humidity (Not displayed with LU cabinet)
If humidity control has been turned OFF, “OFF” is displayed
here.

○

MONITOR

℃

CONST.

RUN

%RH

Press the

key and move to the next setting.

2. Target temperature (and humidity)

Target temperature

Target humidity (Not displayed with LU cabinet)
If humidity control has been turned OFF, “OFF” is displayed
here.

○

MONITOR

℃

CONST.

RUN

%RH

Press the

key and move to the next setting.

3. Time remaining to step end

Time remaining to step end (Counted down)

* Time is displayed either in the range of 00 (h): 00 (min) to 99

(h): 59 (min), or 100 to 999 hours.

○

MONITOR

PRGM

RUN

REM.TIME

min

Press the

key and move to the next setting.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Содержание LH-113















































































































Результаты поиска

Содержание LH-113

Отзывы:

Похожие инструкции для LH-113

Бренды по названию

Популярные бренды

ESPEC LH-113, Руководство пользователя

Результаты поиска

Содержание LH-113

Отзывы:

Похожие инструкции для LH-113

Бренды по названию

Популярные бренды