ESPEC LH-113 Скачать руководство пользователя страница 54

Страница: 54 / 110

Chapter 4 Operation

10. Temperature ramp control ON/OFF

Select “OFF” and press the

ENT.

key. Then, press the

key.

In ramp control, temperature rise or fall from the setting in the previous step to that of this step is

controlled at a constant rate, or ramp.

Temperature ramp control status

：

Turns temperature ramp control ON.

OFF

Turns temperature ramp control OFF.

ENT.

：

Enters the selection.

Stands for “Temperature Ramp”.

○

PRGM SET

* Temperature ramp control cannot be used in temperature

pull-down with LH cabinets because the heater is shut OFF

in temperature pull-down. Temperature is pulled down

naturally.

* Temperature ramp control cannot be used when soak

control is used.

* Temperature ramp control cannot be used with step No. 1.

It is kept OFF even if turned ON in step No. 1 setup.

Press the

key and move to the next setting.

11. Humidity ramp control ON/OFF (Not necessary for LU cabinet)

Select “OFF” and press the

ENT.

key. Then, press the

key.

In ramp control, humidity rise or fall from the setting in the previous step to that of this step is

controlled at a constant rate, or ramp.

Humidity ramp control status

Turns humidity ramp control ON.

OFF

Turns humidity ramp control OFF.

ENT.

Enters the selection.

Stands for “Humidity Ramp”.

PRGM SET

* Humidity ramp control cannot be used in humidity

pull-down with LH cabinets because the heater is shut OFF

in humidity pull-down. Humidity is pulled down naturally.

* Humidity ramp control cannot be used when soak control is

used.

* Humidity ramp control cannot be used with step No.1. It is

kept OFF even if turned ON in step No.1 Setup.

Press the

key and move to the next setting.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Содержание LH-113















































































































Результаты поиска

Содержание LH-113

Отзывы:

Похожие инструкции для LH-113

Бренды по названию

Популярные бренды

ESPEC LH-113, Руководство пользователя

Результаты поиска

Содержание LH-113

Отзывы:

Похожие инструкции для LH-113

Бренды по названию

Популярные бренды