QuadroM 32x/8L/26x/12Li/26xi Manual II: Administrator's Guide
Administrator’s Menus
QuadroM 32x/8L/26x/12Li/26xi; (SW Version 5.2.x)
14
Network Status
The
Network Status
page includes the following information
about
Interfaces
:
Interface Name
lists the Network interfaces available on the
Quadro (LAN, WAN, IPSec and a number of PPPs, depending
on the number of active PPP connections).
IP Address
lists the IP addresses corresponding to each
network interface.
Subnet Mask
lists the subnet masks corresponding to each
network interface.
Properties
will list either the MAC address corresponding to
each network interface on the Quadro or the PPTP, L2TP and
IPSec peer IP address if an active VPN (IPSec or PPP)
interface exists.
Monitor
includes links to survey LAN, WAN, IPSec and PPP
traffic correspondingly. The VPN traffic link will be displayed
only if a VPN has been configured. The selection of these links
will open a new window with a table of network traffic statistics
on the following selected interfaces:
•
Received Bytes
•
Received Packets
•
Received Errors
•
Received Drop Errors
•
Received Overrun Errors
•
Received MultiCast
Packets
•
Transmitted Bytes
•
Transmitted Packets
•
Transmitted Errors
•
Transmitted Drop Errors
•
Transmitted Carrier Errors
•
Transmitted Collisions
Fig. II-17: QuadroM Status Network Status page
When opening the corresponding interface statistics window, no traffic values are displayed at first. After opening the window, the tables will serve as
a counter and traffic statistics will be updated every minute.
DNS Server
,
Alternative DNS Server
and
Default Gateway
- these display the Quadro settings corresponding to what has been configured with
the
System Configuration Wizard.
Services
(NTP Server and Client, DHCP Server and Client, DNS, Firewall, NAT, PPP, IDS) statuses: shows if they have
stopped
or if they are still
running
.
The
View VPN Status
link refers to the
VPN Configuration
page where all VPN (IPSec, PPTP and L2TP) connections can be viewed and edited.
Transfer Statistics
- link to the Transfer Statistics page.
The
Transfer Statistics
page shows a user-defined statistics
table with the transmit/receive value (criteria), interface type
and time period. It contains the following components:
Time range of statistic table
- the
drop down list includes the
period (in days) statistics data that is to be collected and the
corresponding diagram charts that are to be built.
Interface
- the
drop-down list offer the values:
•
WAN
- Wide Area Network (WAN) events only
•
LAN
- Local Area Network (LAN) events only
When
Show also as readable values
checkbox is selected,
an additional table with statistics values will be displayed on
the next page.
Fig. II-18: Transfer Statistics page
