QuadroM 32x/8L/26x/12Li/26xi Manual II: Administrator's Guide
Administrator’s Menus
QuadroM 32x/8L/26x/12Li/26xi; (SW Version 5.2.x)
86
Please Note:
RTP Statistics is logged only when at least one of the call endpoints is located on the Quadro. For example, it will not be logged when:
•
calls incoming from or addressed to the IP lines or remote extension,
•
calls from an external user are routed to another external user through Quadro’s routing rules.
In the first case, RTP statistics will be logged if remote extension or IP line user is calling locally to the Quadro’s extension or auto attendant.
The
Configure Call Quality Event Notification
link leads to the
Configure Call Quality Event Notification
page where call quality control
notification specifics can be configured.
From the
Configure Call Quality Event Notification
page you may configure event notification policy when the call quality is lower than the
allowed level.
This page consists of a
Notify
checkbox, which enables the call
quality monitoring mechanism for the corresponding event
notifications, and a
Call Quality less than
drop down list where the
least satisfactory call quality should be selected. When a call with the
quality less than the level selected here is registered on the Quadro,
an event notification will appear. When the
Notify
checkbox is
disabled, no Call Quality events will occur on the Quadro.
Please Note:
The ways of notification for the Call Quality events
should be configured from the
Events
page.
Fig. II-152: Configure Call Quality Event Notification page
The
Configure System Events
link leads to the
Events
page where the methods of notification for each system event can be configured.
FAX Statistics
The
FAX statistics
page is accessed from the Call Statistics page by
clicking on the
FAX
link in the
Details
column for the calls that
contain T.38 FAX transmission.
The
FAX statistics
page provides information about received and
transmitted packets, lost, bad and duplicated packets. This statistics
refers only to the T.38 FAX transmission. The FAX statistics is not
available for the FAX transmitted with other protocols.
Fig. II-153: FAX Statistics page
SIP Settings
The
SIP Settings
provide information on the SIP receive UDP and TCP ports and allows you to select DNS server configurations for SIP and the SIP
timers scheme.
The
UDP Port
indicates the SIP UDP (User Datagram Protocol)
receive port number. By default 5060 is selected and used. The SIP
UDP port cannot be in the selected RTP/RTCP port range for FXS
and IP lines (see
RTP Settings
), otherwise the “Mapped port for SIP
shouldn’t be in RTP port range” error message appears.
The
TCP Port
indicates the SIP TCP (Transmission Control Protocol)
receive port number. By default, 5060 is selected and used.
Please Note:
Quadro will not use TCP protocol as a transport for SIP
messages if the
TCP
Port
field is left empty.
The
TLS Port
indicates the SIP TLS (Transport Layer Security)
receive port number. By default, TLS port is not used and is empty
(coded to 0).
TLS port
number should be different from the
TCP Port
number.
The
Realm
text field requires messaging level information to be
included in SIP messages sent by Quadro. This information might be
used by remote side for authentication purposes.
Fig. II-154: SIP Settings page
Enable Session Timer
enables advanced mechanisms for connection activity checking. This option allows both user agents and proxies to
determine if the SIP session is still active.
