QuadroM 32x/8L/26x/12Li/26xi Manual II: Administrator's Guide
Administrator’s Menus
QuadroM 32x/8L/26x/12Li/26xi; (SW Version 5.2.x)
126
The Best Matching Algorithm will stop after executing step 3 as no new sub-lists are formed. The resultant list of prioritized patterns will be the
following:
VoIP Carrier Wizard
The
VoIP Carrier Wizard
is used to define access codes for available VoIP Carrier accounts which will particularly allow you to reach users over IP-
PSTN providers or to call to the peers registered on the certain SIP servers by dialing simple digit combinations.
For each configured VoIP carrier, the wizard creates a specific IP-PSTN routing rule in the
Call Routing
table. This entry is available to PBX users
only, which means only PBX users can make calls to the corresponding VoIP carrier. Additionally, a virtual extension automatically generated in
Extensions Management
will be registered on the defined VoIP Carrier’s SIP server.
The settings of that extension will be used to make calls from Quadro’s users towards the created VoIP Carrier will be placed.
VoIP Carrier Wizard – Page 1
provides a following option of
describing the VoIP carrier:
When predefined carrier is selected in the
VoIP Carrier
drop
down list, the SIP Server and Port will be already predefined
in the next page.
Manual
selection allows you to manually
set up the VoIP Carrier settings.
The
Description
field allows you to insert an optional
description of the VoIP Carrier.
Fig. II-218: VoIP Carrier Wizard page 1
The prioritized list
1231
1[1-3]3[0-8]
{100-150, asd, \*\?}1
123?
?2?1
[1-3]???
12*31
123*
{11-15}3*
*2*1
*1*
[1-3]*
*
