QuadroM 32x/8L/26x/12Li/26xi Manual II: Administrator's Guide
Administrator’s Menus
QuadroM 32x/8L/26x/12Li/26xi; (SW Version 5.2.x)
139
The
PPTP Server Configuration
page is used to configure the
PPTP server settings and offers the following components:
The
PPTP Subnet
text fields are used to enter the IP address
range for the PPTP server and clients within the PPTP tunnel.
The value specified for the subnet mask is fixed to 24 to restrict
the possible number of clients for the PPTP connection.
Please Note:
The first address specified in the PPTP Subnet
will be assigned to the PPTP server; others will be assigned to
the clients. The PPTP server subnet should be different from the
L2TP server subnet, otherwise a corresponding error message
will appear.
The
Authentication
manipulation
radio buttons are used to
select the corresponding authentication protocol by which the
client communicates with the server. The
MSCHAPv2
selection
enables
Encryption
drop down list where the encryption
method can be selected.
Fig. II-245: PPTP Server Configuration page
The
L2TP Server Configuration
page is used to configure the
L2TP server settings and provides the following input options:
The
L2TP Subnet
text fields are used to enter the IP address
range for the L2TP server and clients within the L2TP tunnel.
The value specified for the subnet mask is fixed to 24 to restrict
the possible number of clients for the L2TP connection.
Please Note:
The first address specified in the L2TP Subnet will
be assigned to the L2TP server; others will be assigned to the
clients. The L2TP server subnet should be different from the
PPTP server subnet, otherwise a corresponding error message
will appear.
Fig. II-246: L2TPServer Configuration page
To Specify an IPSec Connection
1.
Press
the
Add
button on the
IPSec Connection Settings
page. The
IPSec Connection Wizard
will appear in the browser window.
2.
Select a VPN
Peer Type
and assign a name to the
IPSec Connection
. Press
Next
to go to the next page of the IPSec Connection wizard.
3.
Enter the remote side IP parameters, check subnets/gateways for the connection, select the NAT traversal option (if needed), and the desired
keying type. Press
Next
to go to the next page of the IPSec Connection wizard.
4.
If
the
Automatic Keying
type has been selected, enter the automatic keying parameters and select the PFS and IPSec compression options (if
needed). If the
Manual Keying
type has been selected enter the encryption and authentication keys and SPI(s).
5.
To specify an IPSec connection with these parameters, press
Finish
. Press
Cancel
to abort the operation.
To Manage an RSA key for the IPSec Connection
1.
Press
the
RSA Key Management
button on the
IPSec Connection Settings
page. The
IPSec Connection RSA Key
will appear in the
browser window.
2.
Select the RSA key length and press
Generate
to generate a new RSA public key. This may take several seconds.
3.
Enter a destination e-mail address in the
Email this key to peer
text field, then press
Send
to send the new RSA public key.
To Delete/Stop/Start/Enable/Disable a VPN Connection
1.
Select one or more checkboxes of the corresponding connections that should to be deleted/stopped/started from the
Connections
tables.
Press
Select all
to delete/stop/start all connections.
2.
Click on the Delete/Stop/ Start button from the table’s menu to perform the corresponding operation for the selected VPN connection(s).
3.
If deleting, confirm it with pressing on
Yes
. The VPN connection will be deleted. To abort the deletion and keep the VPN connection in the list,
click
No
.
Dynamic DNS Settings
The
Dynamic DNS
(DynDNS) is a service that is used to map a dynamic IP address to a host name. This service is used if you are connected to the
Internet with a dynamic IP address (and PPP, DHCP client) and want to allow access from the Internet to a device behind the firewall. For example, if
you want to run your own WEB server.
To enable the DynDNS service on Quadro, you first have to choose a DynDNS provider and register at their website.
