QuadroM 32x/8L/26x/12Li/26xi Manual II: Administrator's Guide
Administrator’s Menus
QuadroM 32x/8L/26x/12Li/26xi; (SW Version 5.2.x)
21
SIP Registration Status
The
SIP Registration Status
is a table displaying the SIP registration
information of the Quadro extensions.
The table contains a list of all the registered extensions of the Quadro,
SIP registration name for each extension, addresses of SIP servers
where they are registered (if applicable), whether or not it is registered
for each extension, and the registration date and time. By clicking on
the row heading, the table will be sorted by the selected column. When
sorting (ascending or descending), arrows will be displayed next to the
column heading.
The links inside the table will link you to the
Extensions Management
page where the SIP registration settings may be altered.
The
Detected Connection Type
field displays the connection type
Quadro currently is acting in (direct connection or behind NAT). If
Quadro is acting behind NAT, the NAT machine IP address is also
displayed.
The
Registered IP Lines
table lists the IP lines and remote extensions
registered on the Quadro. The table indicates the actual IP addresses of
the remote devices, the usernames by which the devices have been
registered on the Quadro, as well as the registration status information.
The
SIP Tunnels to Slave Devices
and
SIP Tunnels to Master
Devices
tables list the SIP tunnels between local and the remote
Quadros (see
SIP Tunnel Settings
). The
SIP Tunnels to Slave
Devices
table lists those tunnels where local Quadro acts as a master.
The
SIP Tunnels to Master Devices
table lists those tunnels where
local Quadro acts as a slave.
Fig. II-32: SIP Registration Status page
IP Lines Registration Status
The
IP Lines Registration Status
displays a table with the IP Lines
registration information on the Quadro.
The table lists the IP lines and remote extensions registered on the
Quadro. The table indicates the actual IP addresses of the remote
devices, the usernames by which the devices have been registered on
the Quadro, as well as the registration status information.
Subscription Count
field indicates used and allowed number of
subscriptions for all IP phones registered on the Quadro. Subscriptions
are events originated by IP phones when watching other extensions or
SLAs on the Quadro and when monitoring voice mailbox for new
received voice mails.
Fig. II-33: SIP Registration Status page
When the allowed number of subscriptions is reached, no new subscriptions are possible. Typically the number of subscription should be keep
reasonably below the maximum allowed number, to avoid losing subscriptions. Thus, in case the actual subscription number is close to the limit,
configuration of IP phones should be adjusted to decrease the number of total subscriptions on the Quadro.
Used Subscription Distribution
field indicates IP phone's subscriptions distribution among BLF (Busy Lamp Field) subscriptions, which are used
for watching extensions and SLAs on IP phones, and MWI (Message Waiting Indication) subscriptions, which are used for voice mailbox status
indication on the phone.
