QuadroM 32x/8L/26x/12Li/26xi Manual II: Administrator's Guide
21BAppendix: Conference Services for Moderators and Participants
QuadroM 32x/8L/26x/12Li/26xi; (SW Version 5.2.x)
156
Appendix: Conference Services for Moderators and Participants
This chapter describes the feature codes for the Conference Services that enable the moderator and participants to manage call conferences from
the phone.
Conference Services accessible during the conference:
Keys
Invite Participant
To invite a participant dial *1 + Participant's SIP address (or *1 + Routing Number). Service is available for Moderators only.
Get the number of participants in the conference
Plays information about the total number of participants in the conference at the certain moment.
Get the state of recording
Plays the state of conference recording (started, stopped or paused).
Lock the conference
Locks the conference. When conference is locked, nobody can dial in any more.
Service is available for Moderators only.
Unlock the conference
Unlocks the conference. Now participants are allowed to dial in to the conference.
Service is available for Moderators only.
Dial out to all users with dial out settings enabled
Initiates the dial-out to all participants currently inactive in the conference but configured to be dialed out (also those added manually
from the handset by moderator). Service is available for Moderators only.
Dial out to all users participant to the conference
Initiates the dial-out to all participants currently inactive in the conference.
Service is available for Moderators only.
Next Phone with Video Capability
Shows the next phone with video capability. Also switches from automatic mode to manual one.
Previous Phone with Video Capability
Shows the previous phone with video capability. Also switches from automatic mode to manual one.
Automatic Video Switching Mode
With this key combination, the loudest speaking participant is displayed on all video-capable phones. If that participant has no video
capability, a black screen will be displayed.
Start or Resume Conference Recording
Service is available for Moderators only.
Pause Conference Recording
Service is available for Moderators only.
Stop Conference Recording
Service is available for Moderators only.
Request to Speak
With this key combination, a listener requests to speak and a notification hand-up icon is displayed in the
Conference Progress
table.
The moderator can then switch the particular listener either to speaker or lecture mode. With a speaker permission granted, listener can
speak to the conference along with other participants. With a lecturer permission granted, listener can speak to the conference having all
other participants muted in the conference. This service is available for listener participants only.
Cancel the Request to Speak
With this key combination, listener cancels his request to speak and a notification hand-up icon disappears from the
Conference
Progress
table. This service is available for listener participants only.
