QuadroM 32x/8L/26x/12Li/26xi Manual II: Administrator's Guide
Administrator’s Menus
QuadroM 32x/8L/26x/12Li/26xi; (SW Version 5.2.x)
92
•
After the defined period of time
– requires the period after which the extension will automatically log out from the public phone.
•
At the certain moment
– requires the moment (hour and minute) when the extension will automatically log out from the public phone.
Information on the Caller ID system:
Caller ID
is a service identifying the caller (when performing a call or sending a voice mail) and notifying the called party about the identity of the
caller. The Caller ID service is available only for phones with a display to show that information. Two types of Caller ID notification are available on
Quadro: FSK and DTMF.
FSK Standard
The FSK standard supports caller ID indication either with the phone handset on-hook or if the called party is already busy with another call or
operation (handset is off-hook). For internal calls, caller ID notification in FSK can show up to two lines of identifiable parameters on the called
phone’s display. The first line shows the caller’s extension number. The second line shows the caller’s nickname (if indicated in the configuration).
For external IP calls, caller ID notification in FSK can also show up to two lines of identifiable parameters on the called phone’s display. The first line
shows the caller’s user name. The second line shows the caller’s nickname (if indicated in configuration). If the nickname is not available and there is
a display name, provided by the caller party, the second line will display it, otherwise the URL, in the format: username@host will be displayed. For
calls from the PSTN network, the entire caller ID message will be shown.
DTMF Standard
The DTMF standard supports caller ID indication only if the phone handset is on-hook (phone is free and ready to accept calls). This standard also
has caller ID notification conditions but they are non-configurable. Caller ID notification in DTMF can show only one line of identifiable parameters on
the called phone’s display. For internal calls, it is the caller’s extension number. For external IP calls, it is the caller’s user name. For calls from the
PSTN network, caller ID will only display the caller’s phone number.
Please Note:
DTMF supports only parameters consisting of digits. If any letter symbol has been used in the external caller user name, DTMF will not
display caller ID.
To Configure the Line Settings
1.
Select the line number that should to be configured from the
Active Lines
column in the
Lines
table on the
Line Settings
page.
2.
Press on the line number link in the
Line Settings
table. The
Line Settings - Line#
page will appear in the browser window.
3.
Use
the
Caller ID
drop down list to select the caller ID detection system mode corresponding to the phone type.
4.
Enable
the
Dialing Prefix With Caller ID
checkbox if needed.
5.
Configure
the
Remote Party Disconnect Indication
parameters by selecting the corresponding checkboxes.
6.
Define
a
Ringer Type
from the corresponding drop down list.
7.
Enable
Off-hook Caller ID
if needed.
8.
Press
the
Save
button on the
Line Settings - Line#
page to save the caller ID system and other line specific configuration settings.
IP Line Settings
The
IP Line Settings
page is used to configure IP lines for IP phones to be connected to the Quadro. Quadro provides the options to connect SIP
phones to its LAN side, assign the corresponding IP line to an active extension, and use SIP phones as a simple phone with all telephony services of
the Quadro (for example, call hold, waiting, transfer, etc).
By default, 32 IP Lines are available on the QuadroM 32x/8L/12Li and 16 IP Lines are available on the QuadroM 26x/26xi. The
IP Lines Settings
page displays a table with the available IP lines on the Quadro. Entering the feature key in the
Features
page can enable more IP lines.
Enable PnP to IP lines
checkbox is used to setup the SIP phones connected to the Quadro via Plug and Play automatic configuration service. To
use this service, this checkbox needs to be selected. The SIP phone should be reset then. After a clean boot-up of the SIP phone, Quadro will detect
the SIP phone and all its characteristics, generate the automatic configuration file and will upload it to the SIP phone. The SIP phone will be then
configured on the first available IP line of the Quadro and will become completely functional.
Please Note:
The Plug and Play service is only available for the supported SIP phones (see the list below). This service will not work in case the SIP
phone is already manually configured or if it is not reset after enabling the
Enable PnP to IP lines
checkbox.
Enable Firmware Version Control
checkbox is used to control the firmware version running on the SIP Phone attached to the Quadro. This service
also allows you to have the new firmware automatically downloaded and installed on your SIP Phone (in case your SIP phone was running an old
firmware upon connecting to the Quadro or when the Quadro’s firmware has been updated and the compatibility was changed to the higher firmware
version of the SIP phone). Every new firmware of Quadro is compatible to a certain firmware version of each supported SIP phone. If you are running
older firmware on your SIP phone, this service will automatically download and install the newer firmware on your SIP phone.
Please Note:
The Firmware Version Control service is only available for the supported SIP phones (see the list below).
Attention:
Do not select this checkbox if you wish to run other firmware version on your SIP phone than the one compatible with the Quadro.
The
Configure IP phones from
drop down list is used to select the Quadro's interface where the IP phones are connected. Besides LAN and WAN,
this list also includes all defined VLAN interfaces.
The
Phones Default Template
drop down list is used to select the Quadro default template for the IP Phone which will be used if not selected
otherwise on the particular line (see below).
The
Manage IP Phones Templates
link takes to the
IP Phones Templates
page where custom IP phone templates may be created.
The
Upload IP Phones Logo
link takes to the
IP Phones Logo
page where custom logo for the IP phone may be uploaded.
