Elkron MP500/16, Руководство по программированию, Страница: 92 / 140

92 MP500/4N-8-16 Programming
5.14.2
How to view open inputs
The presence of one or more open inputs is indicated by the specific LED on the keypad and by the reader LED (see chapter 1 -
Control devices
)
. These LEDs also indicate the opening of isolated inputs.
To view input addresses:
1) Enter <Master / User / Installer / Technical Manager code> , press twice and then press
repeatedly until OPEN INPUTS appears.
2) Press
. The inputs are identified as “<Logical address>:<Name>” on the second line. For
example, an input to whic
h the kitchen detector is connected with logical address “3” and named
“Kitchen” will be identified as “In003:Kitchen”.
3) Use and to scroll the list of open inputs.
4) Press and to see the input customisation.
5) Press repeatedly to exit from the menu after examining the list.
5.14.3
How to view isolated or inhibited inputs
The presence of one or more isolated or inhibited inputs is indicated by the specific LED on the keypad and by the reader LED (see
chapter
1 - Control devices ).
An input can only be isolated if it has been programmed as such.
An input may be manually isolated by the installer or technical manager.
To view addresses of isolated inputs:
1) Enter <Master / User / Installer / Technical Manager code> , press twice and then press
repeatedly until ISOLATED INPUTS appears.
2) Press
. The inputs are identified as “<Logical address>:<Name>” on the second line. For
example, an input to which the kitchen detector is connected with logical address “3” and named
“Kitchen” will be identified as “In003:Kitchen”.
3) Use and to scroll the list of open inputs.
4) Press and to see the input customisation.
5) Press repeatedly to exit from the menu after examining the list.
5.14.4
How to examine the Alarms Memory
Alarm events are indicated by the specific LEDs (on keypad and readers) and stored by the control panel. Details on the events can
then be viewed on the keypad display.
Proceed as follows to view details:
1) Enter <Master / User / Installer / Technical Manager code> , press twice and then press
repeatedly until ALARMS MEM appears.
2) Press
. The alarm LED will blink. The inputs are identified as “<Logical address>:<Name>” on
the second line. For example, an input to which the kitchen detector is connected with logical
address “3” and named “Kitchen” will be identified as “In003:Kitchen”.
3) Use and to scroll the list of inputs which caused the alarm.
4) Press and to see the input customisation.
5) Press repeatedly to exit from the menu after examining the list.
UT02:...
OPEN INPUTS
OPEN INPUTS
IN001:...
MP500/16
12/01/2014 10:10
UT02:...
ISOLATED INPUTS
ISOLATED INPUTS
IN001:...
MP500/16
12/01/2014 10:10
UT02:...
ALARMS MEM
ALARMS MEM
IN001:...
MP500/16
12/01/2014 10:10