Elkron MP500/16, Руководство по программированию

Страница: 105 / 140

MP500/4N-8-16 Programming 105
7.2.13
Failure alarm from failure input
Monitoring of devices provided with fault output can be implemented in combination on control panels.
This is generated
when...

A programmed failure input is opened.
The alarm is generated regardless of partition status (H24).
It activates...

The programmed failure outputs which have at least one partition in common with the input which
generated the event.

The dialler to send the respective alarm message (if programmed) in form of numeric code, vocal call,
text message or modem communication.
It is stored...

In the Event Log and the Diagnose Log.

In the faults and anomalies list.
It is indicated...

On fault LED of keypads which have at least one partition in common with the input which generated the
event.

On readers which have at least one partition in common with the input which generated the event.
It is stopped by...

Closing the programmed failure input again.
After having solved the
problem, the control
panel...

Activates the dialler to send the respective failure alarm message (if programmed) in form of numeric
code, vocal call, text message or modem communication.

Stores the end of failure in the Event Log and in the Diagnose Log.

Deactivates the programmed failure outputs.
7.2.14
System failure alarm
This is generated
when...

An anomaly concerning the system power occurs.

An anomaly concerning the battery charging circuit occurs.

An anomaly concerning the sirens occurs.

An anomaly concerning the supplementary power supply occurs.
The alarm is generated regardless of partition status (H24).
It activates...

The programmed system failure outputs.

The dialler to send the respective alarm message (if programmed) in form of numeric code, vocal call or
modem communication.
It is stored...

In the Diagnose Log and in the fault and anomaly memory.
It is indicated...

On The yellow fault LED on the keypads.
It is stopped by...

Solving the problem.
After having solved the
problem, the control
panel...

Stores end of fault in the Diagnose Log.

Activates the dialler to send the respective end of failure alarm message (if programmed) in form of
numeric code, vocal call or modem communication.

Deactivates the programmed system failure outputs.
7.2.15
External communicator failure alarm
This is generated
when...

An external communicator failure input is opened.
The alarm is generated regardless of partition status (H24).
It activates...

The programmed communicator failure outputs.

The dialler to send the respective alarm message (if programmed) in form of numeric code, vocal call or
modem communication.
It is stored...

In the Diagnose Log and in the fault and anomaly memory.
It is indicated...

On The yellow fault LED on the keypads.

On The red LED of the readers.
It is stopped by...

Solving the problem.
After having solved the
problem, the control
panel...

Stores end of fault in the Diagnose Log.

Activates the dialler to send the respective end of failure alarm message (if programmed) in form of
numeric code, vocal call or modem communication.

Deactivates the programmed tel. failure outputs.