MP500/4N-8-16 Programming
33
21) Press
.
22) To record, press
23) Press
.
24) Press
to delete the vocal message of the partition (see paragraph
information).
25) Press
to program the other partitions repeating the procedure from step 9 or press
repeatedly to exit the menu.
4.10 AREAS PROGRAMMING
IMPORTANT!
An areas must have at least one assigned partition. The system automatically distributes the first available
partition to each area when they are created.
See the
Installation Manual
and for a detailed description of the concept of area and possible uses.
Proceed as follows to program the areas:
1) Enter
<Installer code>
, press
, then
and finally
repeatedly until PROGRAMMING
appears.
2) Press
and then
.
3) Press
.
4) Press
.
5) Press
and
to change the number of areas. Possible values are 0, 2 for MP500/4N, and 0,
2, 3, 4 for MP500/8 and MP500/16. Press
to confirm.
6) Press
to confirm the number of areas, otherwise press
.
7) Press
.
8) Press
.
9) Press
and
to select the required area.
10) Press
to confirm.
11) Press
. Enter a descriptive name for the area using the keypad (see paragraph
). The name can be up to 24 characters long.
12) Confirm the choice by pressing
and press
.
13) Press
. Press
and
to select the partition to be assigned. Press
and
to assign
the partition (the square will turn black) or to disassociate it (the square will appear empty).
Partitions which cannot be assigned (e.g. because they are already associated to another
partition) are represented by a dot. Repeat the procedure for all partitions to be assigned to the
area. Press
at the end.
14) Press
to program the other areas repeating the procedure from step 9 or press
repeatedly to exit the menu.
VOCAL NAME
RECORD
VOCAL NAME
DELETE
UT00:INSTALLER
PROGRAMMING
PROGRAMMING
AREAS
AREAS
NUMBER OF AREAS
NUMBER OF AREAS
N : 0
ARE YOU SURE?
PRESS OK or ESC
AREAS
CONFIGURE AREAS
CONFIGURE AREAS
AR A:…
AR A:…
NAME AREA
NAME AREA
AR A:...
AR A:…
ASSIGN
SE02:…
□■□□□□□□
Содержание MP500/16
Страница 139: ...MP500 4N 8 16 Programming 139 ...
