Elkron MP500/16, Руководство по программированию

Страница: 59 / 140

MP500/4N-8-16 Programming 59
4.18.6
PSTN parameters
The following parameters can be used for configuring the PSTN connection:

Nation : select the country where the system is installed to automatically set the technical PSTN telephone line connection
parameters. Available countries are: Italy, France, Germany, Czech Republic, Poland, Spain, Portugal, Greece, UK.

PABX connection : if the dialler is connected through a switchboard (PABX) and not directly to the external telephone line, the
number (from 0 to 9) that the dialler must dial to engage the telephone line can be programmed.
IMPORTANT! Remember to deactivate the PSTN Line Test function if "PABX Connection" is selected (see 4.18.10
PSTN Line Test ).

Tone Line Check : this is used to determine whether the dialler will wait for the dial tone (Tone Line Check enabled) or not (Tone
Line Check disabled) before dialling.

Answer control : this is used to determine whether the dialler must wait for the called number to answer or not. The possible
options are:
o
Enabled : the vocal message only starts after the called number has answered. The vocal telephone number which replied is
not called back.
o
Disabled : the vocal message is sent immediately after having dialled the telephone number without waiting for the called
number to answer. The alarm message is repeated three times. In this condition, the control panel will repeat the vocal
message three times for each number regardless of whether the number answers or not. The call cycle can still be stopped by
dialling code “12”, as described in
4.18.5 Alarm message and call block sending .
IMPORTANT! Read paragraph 4.18.5.1 Answering machines and call cycles before enabling or disabling the "Answer
Control" function.
4.18.6.1
Programming procedure
Proceed as follows to program the PSTN parameters:
1) Enter <Installer code> , press , then and finally repeatedly until TELEPHONE DIALER
appears.
2) Press and then several times until PSTN PARAMETERS appears.
3) Press .
4) Press . Press and to select the country. Press to confirm.
5) Press .
6) Press . Press and to disable the function (DISABLE, i.e. the dialler does not connect to
a switchboard) or a number to be dialled to engage the line (DIGIT:
9 … DIGIT: 2). Press
to
confirm.
7) Press .
8) Press . Press and to enable or disable the dialling tone check function. Press to
confirm.
9) Press .
10) Press . Press and to enable or disable the answer check function. Press to
confirm.
11) Press repeatedly to exit from the menu.
UT00:INSTALLER
TELEPHONE DIALER
TELEPHONE DIALER
PSTN PARAMETERS
PSTN PARAMETERS
NATION
NATION
ITALY
PSTN PARAMETERS
PABX CONNECTION
PABX CONNECTION
DISABLE
PSTN PARAMETERS
TONE LINE CHECK
TONE LINE CHECK
DISABLE
PSTN PARAMETERS
ANSWER CONTROL
ANSWER CONTROL
DISABLE