Elkron MP500/16, Руководство по программированию

Страница: 64 / 140

64 MP500/4N-8-16 Programming
4.18.12
Rem Ctrl Backup
The "Rem Ctrl Backup" function is used to manage calls to the telephone numbers programmed for numeric codes (IDP , ADF, C200B,
C200B P-P) and modems.
If the function is enabled, calls to other telephone numbers programmed for numeric codes and modems for the same event will be
blocked as soon as the first numeric code or modem call is successfully established.
A call is considered successfully established once acknowledgement is received from the alarm receiving centre.
If the first call is not successful, the control panel will call the next number and so on until the event to be transmitted is correctly
sent/received or until the attempts are finished, if the calls are not successful.
If the "Rem Ctrl Backup" function is disabled, the dialler will call all the numbers programmed for numeric codes and modems,
regardless of the received replies.
4.18.12.1
Programming procedure
Proceed as follows to program the Rem Ctrl Backup function:
1) Enter <Installer code> , press , then and finally repeatedly until TELEPHONE DIALER
appears.
2) Press and then several times until REM CTRL BACKUP appears.
3) Press . Press and to select whether to enable or disable the Rem Ctrl Backup function.
Press to confirm.
4) Press repeatedly to exit from the menu.
4.18.13
Answer Machine
The control panel will answer incoming telephone calls if the answering machine function is enabled.
The function must be enabled separately for the PSTN line and the GSM networks. Therefore, the control panel can be programmed to
answer GSM calls and not PSTN calls, and vice versa.
When enabling the answering machine function on the PSTN line, you can specify after how many calls the dialler must answer,
compatibly with other devices (e.g. other answering machines).
The GSM module answers after five rings.
Note: The GSM module will remain normally off and only turned on for calling if the GSM answering machine function is disabled.
IMPORTANT! The answering machine function is not guaranteed if the call is "anonymous", i.e. caller's ID is hidden (this
applies to calls from landlines or mobile phones).
The relevant function on the landline or mobile phone may be "Show ID", "Show my number to", "Show personal number" or
the like.
If you cannot establish a communication with the control panel, check the settings of the telephone in use and try again.
UT00:INSTALLER
TELEPHONE DIALER
TELEPHONE DIALER
REM CTRL BACKUP
REM CTRL BACKUP
DISABLE