Elkron MP500/16, Руководство по программированию, Страница: 48 / 140

48 MP500/4N-8-16 Programming
4.15.3
Key configuration
The following parameters can be defined for each key:

Key type , i.e. what the key controls. The possible options are:
o
Accesses : the key switches the door opener output and this is stored on the event log.
o
Partitions : the key is enabled for the normal monitoring functions of the burglar alarm system (arming/disarming).
o
Part Accesses : the key is enabled for both functions.

Partitions , i.e. the partitions which are assigned to the key.

Name , i.e. a descriptive name to easily identify the key on the event log and in messages.
Proceed as follows to configure an electronic or proximity key:
1) Enter < Installer / Technical Manager code> , press , then and finally repeatedly until
SETTINGS appears.
2) Press and then several times until KEYS appears.
3) Press and then several times until CONFIG. KEY appears.
4) Press . Press and to select the keys to be configured. Press to confirm.
5) Press . Press and to select partition control, access control or partition-access control.
Press to confirm.
6) Press .
7) Press . Press and to assign the key to the entire system or to specific partitions. Press
to confirm.
8) The screen page shown here by the side will appear if SYSTEM is selected. Press and to
assign the key to the entire system or not. Press to confirm.
9) The screen page shown here by the side will appear if PARTITIONS is selected. Press and
to go from one partition to the other. Press and to select or deselect the partition
( empty square = not assigned, full square = assigned). Press to confirm the selection.
10) Press .
11) Press . Give a descriptive name (up to 24 characters long) to the key and press to confirm.
See paragraph 4.2 How to enter alphanumeric characters for insertion.
12) Press repeatedly to exit from the menu.
UT00:INSTALLER
SETTINGS
SETTINGS
KEYS
KEYS
CONFIG. KEY
CONFIG. KEY
KE01:…
KE01:…
KEY FUNCTION
KEY FUNCTION
PARTIT. CONTROL
KE01:…
ASSIGN
ASSIGN
SYSTEM
SYSTEM
DO NOT ASSIGN
SE01:
□□□□□••••••••••
KE01:…
NAME