Elkron MP500/16, Руководство по программированию

Страница: 88 / 140

88 MP500/4N-8-16 Programming
5.9.3
Total disarming from KP500DP/N keypad
Proceed as follows to disarm all partitions using the proximity key on a KP500DP/N keypad:
1) Approach the proximity key to the proximity key reader.
2) The keypad will beep. Press to exit without disarming.
3) After 5 seconds, the status LED will switch off and the squares will become empty indicating that the
partitions have been disarmed. The following will appear on the display:
IMPORTANT! The key will disarm only the assigned partitions and not necessarily all the partitions
even with this procedure.
IMPORTANT! The LED H (see Figure 3 - KP500DP/N - KP500D /ST keypad) will light up and the
buzzer will sound to indicate an error (long beep) if a key which can be not been acquired (the key
is not recognised) or which has not been enabled is used.
5.9.4
Partial disarming from electronic key reader
Follow the same procedure used for partial arming from electronic key reader to partially disarm the system from an electronic key
reader.
5.9.5
Partial disarming from proximity key reader
Follow the same procedure used for partial disarming from proximity key reader to partially disarm the system with a proximity key
reader.
EXECUTED
DISARM
PARTITIONS